Specifications

24
142 SIERRA ST., EL SEGUNDO, CA 90245 [phone] FAX [phone] www.ESE-WEB.com
OPTIONS
Options listed below are available only on certain products and descriptions are relative to products
described in this brochure. Refer to product “Specifications” or the Price List for option availability. Features
neither listed as a Standard Feature nor available as an Option may be available on a “Custom” basis.
Please consult the ESE Factory with your specific need. (Certain combinations of options are not available.)
Black Black Panel: Black Anodized Front Panel.
C Crystal Timebase: A .002% crystal is employed for
those applications requiring independence from
the line frequency. A trimmer is included for greater
accuracy (2-3 seconds/week).
D Remote Control: This option consists of a connector
wired to switches on a control plate via a six foot
cable. Extra cable available.
DC DC Operation: 12-35 VDC Operation (No AC Power
Input is supplied with Option “DC”).
EQ Equalization Trimmer
: Front panel accessible trimmer
when cable exceeds 100’ (400’ max.).
HR Hr. and 1/2 Hr. Relay Closure
: Rear panel accessible
relay closure circuit.
I/O Additional Input/Output Loop Set: 2 additional Loop-
Thru’s per set, maximum of 4 additional Loop-Thru’s
(2 sets).
J 220 VAC, 50/60 Hz Operation
: Required on many
overseas applications.
MT Precision Multi-Turn Potentiometers
: Designed for
precision gain control (Standard with ES-246/XLR).
P 19” Front Panel (Rack Mount): Designed for mounting
into a standard equipment rack. Panel is 1/8” clear
or black anodized Aluminum and chassis is 5” - 10”
deep.
P2 Dual Rack Mount
: Allows specific units to be mounted
side-by-side on a single Rack Mount panel.
R Remote Input: Rear Mounted connector for Remote
Control Input.
Sync Composite Sync Output: A 2 Vpp output into 75Ω.
T Tenths of Seconds: A tenths of seconds digit is added
to display.
Tone Continuous Tone: A continuous tone at 0db for
Synchronizing Audio with Video.
UL UL Power Supply: The unit is supplied with a UL/CSA
approved wall mount power supply.
XLR XLR Connectors: The terminal blocks are replaced
with XLR connectors (the enclosure is doubled in
height).
CUSTOM CAPABILITIES
Since 1971, ESE has manufactured over 2600 “Specials” (products defined by the customer’s specific
requirement... designed and built by ESE). Many of these “Specials” have evolved into “Standard” Products,
some of which are mentioned in this brochure. If you have a custom requirement, give us a call and put our
“time” and experience to work for you.
OTHER ESE PRODUCTS
Products not found in this brochure may belong to another “Family” of ESE Products. For product information
on any of the below mentioned “Families”, please contact the ESE Factory.
♦ TIME CODE CONVERTERS
♦ TIME CONTROL SYSTEMS
♦ “IRIG” PRODUCTS (including Airborne)
♦ “CUSTOM” PRODUCTS
♦ SMPTE/EBU TIME CODE PRODUCTS
♦ MASTER CLOCK SYSTEMS
♦ CLOCKS & TIMERS
♦ “TIME SYNCHRONIZATION” (9-1-1) PRODUCTS
F I V E Y E A R W A R R A N T Y
All products described in this brochure are warranted free of mechanical and electrical defects, and will
be replaced or repaired without charge if found defective under normal operating conditions when
used as intended. Assembled products must be returned for adjustment within five years of
purchase. Before returning goods, please write or call for shipping instructions.
4/13