DISTRIBUTION AMPLIFIERS AND VIDEO & AUDIO PRODUCTS • S-VHS • Audio Video • Inserters • Faders • High Resolution • VU Indicators • Time Code • Color Bars • Level Interfaces • Black Burst • Clock & Timers In 1982 ESE introduced our first Distribution Amplifier (DA), the ES-207. Since then, we have sold nearly 10,000 of those simple 1 x 4 Video DAs and added over 40 other products to the DA line.
TABLE OF CONTENTS DISTRIBUTION AMPLIFIERS DIGITAL VIDEO DA’S DV-201 3G/HD/SD SDI Video DA (1x4) .................................................................................................................................................... 3 DV-207 3G/HD/SD SDI Video DA (1x4) ..................................................................................................................................................... 3 DV-208 3G/HD/SD SDI Video DA (1x12) .........................................
G/HD/SD SDI VIDEO DISTRIBUTION AMPLIFIERS The DV-201, DV-207, DV-208, DV-212, DV-222 and DV-228 are 3G/HD/SD SDI Distribution Amplifiers. These units feature high-performance & low-cost and are able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. They automatically detect the data rate and then re-clock and equalize the signal. These Distribution Amplifiers can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s. Each of the units are DVB-ASI compliant at 270Mb/s.
1 X 12 & 1 X 24 VIDEO/STEREO DISTRIBUTION AMPLIFIERS The ES-209A is a 1 x 12 Video Distribution Amplifier combined with a 1 x 12 Dual Audio Distribution Amplifier. The ES-224 is very similar except that it is a 1 x 24 version. They are primarily designed to meet the needs of tape duplication systems as well as installations that require Audio and/or Video Distribution. Front panel-mounted controls are provided to adjust Video (EQ & Gain) and Audio (Left & Right Gain) output signals.
DUAL 1 X 4 AUDIO/VIDEO DA WITH 5 BLACK BURST SYNC OUTPUTS The ES-2940 is a single rack mounted unit which contains two Audio Distribution Amplifiers, two Video Distribution Amplifiers and a five output RS-170A Black Burst Sync Generator (BBSG). The unit is designed to meet the requirements of systems which must interface with, distribute and synchronize video and audio signals.
AUDIO DISTRIBUTION AMPLIFIERS The ES-217 & ES-218 (1x4) and the ES-245 & ES-246 (Quad 1x6) are Audio Distribution Amplifiers that accept a balanced or unbalanced audio signal and produce exact copies of that signal. The outputs are isolated and have recessed Gain controls. These units are the “Audio Counterparts” of the Video DA’s (ES-207A and ES-247E respectively) shown on page 6. All inputs and outputs are accessible on terminal blocks for simple “permanent” installations.
VIDEO DISTRIBUTION AMPLIFIERS ESE offers several DAs that operate with standard NTSC or PAL video signals. Described below are the ES-207A (1x4), ES-208 (1x12) and ES-247E (Quad 1x6). The “Audio Counterparts” to the ES-207A and the ES-247E are described on page 5. The ES-247E is a quad 6 output Video Distribution Amplifier housed in a traditional rack mount enclosure.
1X4 VIDEO DISTRIBUTION AMPLIFIER (INDEPENDENTLY ADJUSTABLE CHANNELS) ESE’s introduction of the ES-201 presents the first affordable high performance Video DA with “separate” Gain and Equalization controls. Each of the four video outputs are independently adjustable via separate (recessed) front panel mounted controls. A video loop-thru input and four isolated outputs are accessible via rear panel mounted BNC connectors.
Y/C VIDEO (S-VHS) & HIGH RESOLUTION VIDEO (120 MHz) DISTRIBUTION AMPLIFIERS The ES-227 and ES-237 are 1 x 4 Video Distribution Amplifiers designed to meet the needs of those using Y-C component video (S-VHS) or High-Resolution Video (120 MHz),respectively. Each unit has a loop-thru input and four isolated outputs. Applications include graphics, medical imaging, HDTV and composite video.
“PC” CARD DISTRIBUTION AMPLIFIERS ESE’s family of Distribution Amplifiers includes three 1 x 4 “PC” Card DA’s. These products are designed to plug into any computer with PC/compatible expansion slots (ISA). The boards are half card size and require no additional power (other than that provided by the computer). If space and convenience are considerations, these “PC” cards provide exactly that, another practical solution from ESE.
TIME CODE ISOLATION & DISTRIBUTION AMPLIFIERS Since the early ’80s, ESE’s Audio and Video Distribution Amplifiers have been recognized for their quality and durability. Using very similar technology, ESE presents a line of Distribution Amplifiers (DAs) capable of isolating and distributing most any type of Time Code. The basic idea for each model is the same... provide the ability to distribute time code and compensate for lengthy cable runs while isolating each unit in the Master Clock System.
HD & SD SDI PATTERN GENERATORS The DV-229 and DV-230 are Standard Definition (SD) and High Definition (HD) Serial Digital Interface (SDI) Signal Generators. These units are capable of generating a variety of different patterns. Conveniently located on the front panel are five pushbuttons allowing the user to easily set up the DV-229 and DV-230 using the menus on the LCD.
The main menu consists of ten items, described separately below. Video Format: Sets the Video Format. Available choices are 1080i60, 1080i59.94, 1080i50, 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf24, 1080psf23.98, 720p60, 720p59.94, 720p50, 525i, 625i. Video Pattern: Sets the visual pattern to display.
ES-229 & ES-230 NTSC / PAL COLOR BAR GENERATORS The ES-229 and ES-230 are Color Bar Generators that can be used for aligning monitors or for checking the signal fidelity of a video system. Both units generate RS-170A full-field bars or black-burst. The ES-229 provides one composite output and one S-Video output while the ES-230 provides eight composite outputs. Front-panel DIP switches allow selection of Auto-Black, Bars / Black, Interlace / Progressive, NTSC pedestal On / Off, Chroma On / Off and PAL mode.
ES-219A RS-170A BLACK BURST GENERATORS / SYNCHRONIZERS The ES-219A is a Black-Burst / Sync Generator with four isolated outputs. The unit provides a dependable and stable composite black-burst signal for pre-blacking tapes and/or for general synchronization purposes. The output signal of the ES-219A consists of sync, blanking, reference black setup level and color burst which is SCH phased. Subcarrier frequency and SCH phase may be adjusted if desired.
DV-319 & DV-321 HD/SD SYNC GENERATOR & GENLOCKABLE HD/SD SYNC GENERATOR The DV-319 and DV-321 are HD/SD Sync Generators. Two SD sync outputs, four HD sync outputs, an AES11 output and a Word Clock output are provided. The four HD tri-level sync outputs may be set to one of eighteen different formats. The AES-11 output may be switched between silent and tone modes. All outputs are in sync and accessible on rear panel BNC connectors. Front panel dip switches allow the user to configure the various outputs.
LX-220A NTSC / PAL BLACK-BURST GENERATOR The LX-220A provides a convenient source of composite black-burst for preblacking tapes or for synchronization purposes. Eight isolated outputs are provided on rear mounted BNC connectors. The output signal consists of sync, blanking, reference black setup level and color burst which is SCH phased. The LX-220A employs a temperature-compensated crystal oscillator for high stability. A sinewave tone, at 0 dbm (2.2 vpp), is accessible on the rear-mounted RCA connector.
HD-455/SD/1 TIME CODE READER / VIDEO INSERTER The HD-455/SD/1 is an HD & SD Timecode Reader/Video Inserter. The unit reads SMPTE/EBU LTC, D-VITC or RP-188 and inserts that timecode onto an SDI video signal. The timecode can also be embedded into the D-VITC or RP-188. Additionally, up to 30 characters of user defined text may be inserted into the video. Two independent character windows are available and can be used to insert Time, User Bits, Time & User Bits or User Defined Text.
HD-491/SD RP-188 & DVITC DECODER / GENERATOR The HD-491/SD is an HD & SD SDI Timecode Decoder/Generator. The unit accepts an SDI signal, decodes the RP-188 or D-VITC and produces either a SMPTE or EBU LTC output. Simultaneously, the unit produces an ESE timecode output which can be used to drive new or existing clock systems. A selectable (reclocked or nonreclocked) SDI video loop output is also provided.
ES-206U / ES-266U / ES-306U VIDEO TIME, TIMER & DATE INSERTERS The ES-206U is a “stand-alone” Video Time/Date Generator & Inserter which superimposes Time and Date information onto a looped-thru video signal. The unit generates six digits of date (Month, Day & Year) and six digits of time (Hour, Minute & Second). With the ease of on-screen programming setting the ES-206U is a snap. Controls include Time & Date set and Size, Position & Brightness set.
AUDIO LEVEL INDICATORS ESE offers two basic versions of the “Digital” Audio Level (VU) Indicator. Each version has a reference level (“0 dB”) adjustment and is optionally available in a rack mount configuration with as many as six units mounted on a single 1 3/4” x 19” panel.
AUDIO LEVEL INTERFACE (XLR TO/FROM RCA) The ESE Audio Level Interface is a stereo, bi-directional coupling unit that either meets or beats the specs of the other “Audio Level & Impedance Interface” type products. The ES-244 provides a simple/cost-effective means of connecting equipment with unbalanced -10 dBv inputs/outputs to equipment with balanced +4 or +8 dBm inputs/outputs. “Consumer” CD players, etc. are now easily interfaced with “Professional” recorders and mixing consoles.
DIGITAL CLOCKS & TIMERS Since introducing digital clocks and timers to the Broadcast Industry more than thirty years ago, ESE’s product line has grown considerably, as have our customers’ applications. With more than 40 products in the “Clock and Timer” Family, ESE’s products have found homes at sporting events, broadcast and recording studios and hundreds of other commercial/ industrial settings. Recently, ESE introduced a new series of enclosures (the “LX-” Series) which is described within this brochure.
OPTIONS Options listed below are available only on certain products and descriptions are relative to products described in this brochure. Refer to product “Specifications” or the Price List for option availability. Features neither listed as a Standard Feature nor available as an Option may be available on a “Custom” basis. Please consult the ESE Factory with your specific need. (Certain combinations of options are not available.) Black Black Panel: Black Anodized Front Panel. P C Crystal Timebase: A .