User`s manual

Sierra Video Systems
9
Installation
Introduction
Carefully inspect the frame to ensure that there has been no shipping damage. Make
sure all shipping material is removed from the router frame.
The routing switcher described in this manual can be rack mounted in a standard 19"
(RU) EIA rack assembly and includes rack "ears" at the ends of the front of the frame.
None of the switcher models require spacing above or below the unit for ventilation. If
ample space exists, a 1RU spacing gap is recommended.
Rack Mounting
To rack mount the routing switcher, simply place the unit's rack ears against the rack rails
of the rack, and insert proper rack screws through each of the holes in the rack ears.
Always rack mount the routing switcher prior to plugging the unit into a power receptacle
or attaching any cables.
Dimensions
Frame Height Depth Width
804030
3 RU (5.25”) 16 ½” 19”
Chapter
2