Installation guide

Installation And Software Manual
p.8
Find Cameras on the Network
1. Start AVInstaller
AVInstaller can respond by requesting to close all applications that are currently receiving camera images. This
indicates that AV Video System is already running. Go to the task bar, find the AV icon in the tray and click on it,
see Figure 6. AV Video System will maximize to the entire screen. Right-click anywhere to bring the main pop-up
menu and select “Exit”. AV Video System will terminate.
Figure 6. AV Video System is running in the system tray. AV Video System must be terminated before
installing cameras
2. In AVInstaller window, press Automatic button (see Figure 7.). This will setup all connected and active cameras.
Cameras will be assigned IP addresses from those that are currently un-assigned to other devices. Found and
configured cameras will be displayed in the Present Cameras window
3. Press Alt-F4 to close the AVInstaller window. AVInstaller will prompt you to save information about detected
cameras. Answer “Yes” to save the configuration
Figure 7. Find cameras using AVInstaller