Owner`s manual

15 14
The Remington 2020 App is the primary tool for communicating with and configuring your Remington 2020
Digital Optic System. New features may be released that are not covered in this owner’s manual.
My Media
Use this button to enter the download menu where you can manage what
videos and still images you want to download from your scope to your
device’s photos gallery.
Videos and photos are automatically deleted from the scope after down-
loading.
When you first connect to a scope, the number of videos and photos cur-
rently recorded in the scope’s memory will display below the My Media
button.
Download Shot Media
This button is used to download shot media only, which includes videos
when a shot is fired plus a shot photo. If a shot is not fired, video is saved as
tag media when the tag button is pressed again to cancel tag.
Download Tag Media
This button is used to download tag media only. Photos are not captured
when using the tag button to record videos without firing a shot.
Download Shot and Tag Media
This button is used to download all media stored on the scope.
Clear Media Without Downloading
This button is used to delete all videos and photos that are currently stored on the scope.
Viewing Downloaded Media
Videos and photos are arranged by date when they are downloaded into your device’s photo gallery. Shot
videos and shot photos will appear in sequence, separated by a black thumbnail, so you can easily match shot
videos to shot photos.
Settings
Use this button to enter the settings menu to set various features of your scope including the following:
Manual Temperature
When the scope is first powered on, it is set to automatically read temperature. Temperature can also be
manually set using the HUD Console in cases where the temperature along the bullet’s flight path is different
from that at the shooters position. (See HUD Console section for details.)
Ammunition Selection
You MUST configure your Remington 2020 to match the ammunition being used. Your Remington 2020 is
designed to use specific Remington ammunition loads.
Always check the HUD for current ammunition configuration. (See Ammunition section for details.)
Kill Zone Size
Use to set the kill zone size for Tag fire control when taking a TTR precision guided shot. (See Kill Zone section
for details.)
HUD messages
No Target Found
You may see this message if your target is camouflaged by
surroundings or laser cannot return range due to environmental
conditions such as fog or smoke.
Off Screen Indicator Arrow
If the tagged target moves outside of the HUD view, a yellow
arrow will appear pointing in the direction of the tagged target.
If the target is at extreme range, ballistic drop at high zoom
levels may also cause the arrow to appear.
Tracking Lost
You will temporarily see this message due to following condi-
tions:
1. If the target moves outside of the system’s field of view.
2. If the target moves behind another object.
3. If the target rotates and the intended tag location is no
longer identifiable.
Under certain conditions you may see the following messages or graphics appear in the HUD.
Remington 2020
Remington 2020 AppsFiring Procedure continued
Target Too Close for TTR Lock
You will see this message if your target is less than 50 yards
away.
Target Too Far for TTR Lock
You will see this message if your target is beyond the maximum
TTR range of your Remington 2020 system.