Specifications
FIELDMARSHAL INTEGRATED SECURITY SERVICES
66
Maximum wind: 4
Landing: hand rolls
TMP-Cloud3 Micro UAV
TMP-Cloud3 Micro UAV is a kind of air robot with fixed wings. It's less than 5kg.
It refers to most key technology about micro systems, so it belongs to micro
UAV. Including a lot of subsystems, such as electric aerocraft, GPS navigation
autonomous flight autopilot, video microwave transmission, link- control and so
on.
The airframe of TMP-Cloud3 is made up of the compound of PVC and EPS,
which is light weight, strong intensity, not reflecting Hertzian waves, good
performance of resistance to impact. The main wings of aircraft are in concavo-
convex type. The dynamic load of UAV is big, which makes good volplane
capability. The airframe combined with cabin and haulm. The controller of "flight
level" and "turn up and down" are set at the botton of the haum, which makes
control rather sensitive and convinient to regulate. Cabin is at the barycenter of
the airframe, with large cubage to place different facilities. Single wing structure
is designed on the high platform, which ensures security and stability well.
Wingspan:1120mm
Body length: 970mm
Load: 200g
Take-off gross weight: 1500g
Maximum thrust: 900g
Cruising speed: 25-45 km/h
Flying height: 20-1500m
Endurance: 20-50min
Maximum wind: 4
Landing: hand rolls
DATA ANALYSIS SYSTEMS FROM
UAV AND AERIAL RECORDINGS
!
3DMAnalyst
Software & CalibCam
!
3DM Analyst is a rapid 3D data extraction package for use with digital imagery.
The software uses pairs of aerial or terrestrial digital images that can be obtained
either from digital cameras or scanned images.
3DM Analyst offers advanced functionality for model orientations, using any
combination of control points and camera stations and also allows the use of
natural tie points as additional input to enhance orientations.
Features:
• Supports digital cameras and scanned images in BMP, PNG, TIFF, TGA,
and JPG image formats.
• Built-in support for calibrating digital cameras.
• Customized orientation routines especially designed for difficult terrestrial
models.
• Optional Least-Squares Matching for all digitized data and centroiding of
circular targets to improve accuracy.
• Enhanced automatic DTM generation algorithm with user-controllable
density and correlation criteria.
• Automatic contour and cross-section generation.
• Support for up to 50,000 user-defined feature types arranged in a logical
hierarchy.
• Support for breaklines, areas, and holes to control DTM generation and TIN
formation.
• Three distinct views for digitizing and processing data to suit the user’s
preference:
o Images View, with both images shown side-by-side, featuring the
Single Image DigitisingTool that allows data to be digitized in one
image while the software locates the corresponding point in the
other image.
o 3D View, with all data shown in 3D for full 360 degree viewing,
featuring 3D texture mapped models.
o Stereo View, with images and data shown in stereo to allow true
depth perception. Supports a wide range of industry-standard
stereo hardware as well as the range of handwheels and footdisks.
• DXF import and export ability for compatibility with most mine management
tools.
• 3D image export ability for compatibility with Vulcan and other products
supporting this format.
• User-friendly project wizard to guide in the project creation process.
)
)
HYPERSPECTRAL RESEARCH
CAMERA
Developing hyperspectral imaging applications in following areas:
• Precision farming
• Medical research, ophthalmology, dermatology
• Resource management
• Food safety & quality