Specifications

FIELDMARSHAL INTEGRATED SECURITY SERVICES
44
• Sensitive urban areas
MONITORING FOR EXPLOSIVES PRESENCE
• Government Buildings
• Buildings of strategic relevance
• Ports
• Highways
• Sensitive urban areas
TMP-3.2E CHEMICAL DETECTOR
KEY FEATURE
• Small and light detector that continuously detects war’s chimical agents and
toxic chemicals providing real time data.
• Advanced IMS Technology that uses a non-radioactive source.
• Access ports to use the computer, headset or network cable.
• Over 40 h operation with batteries AA type
• Available in 5 colors.
TMP-3.2E represents a new generation of sophisticated detectors for war
chemical agents, small and light , that will revolutionize the individual protection of
the twentyfirst century soldier. TMP-3.2E contains a non-radioactive source, its
volume is smaller than 492 cm3 and weights less than 0,45 kg. mainly used as a
personal non-intrusive detector, TMP-3.2E continuously detects samples of air
for traces of nirvin agents, vesicants, tossic chemicals, haematochemicals or
suffocating, allowing the operator to take appropriate measures. If used in control
mode, the device has the the ability to examine the cargo,equipment, facilities or
personnel. The device can also be used on mobile or fixed platforms, including
vehicles, ships, aircrafts and installations on fixed location.
TMP-RGS - Remote ground sensor
system
FIELDMARSHAL is able to supply specialist remote ground sensor elements
designed for external deployments.
The RGS system is a wire free alarm system tailored for rugged external
deployments using passive sensing techniques.
The RGS system is intended to covertly monitor a perimeter or area for personnel
and/or vehicle movements and provide alarms. It can be used at critical points or
in dead ground up to 3 Km from the operator.
The basic system consists of a Hand Held Receiver and a number of remotely
deployed Sensors and Transmitter / Sensor Processor units.
The system is compact, robust and easily deployed. It provides the User with
flexible detector options, to enable the remote monitoring of most scenarios.
TMP-SCAN-400 Ground
Penetrating GEO Radar
TMP-SCAN-400 Ground Penetrating Geo Radar is designed to detect point and
extensive metallic and non-metallic objects in various nonmetallic mediums (such
as a ground, water, building units etc).
The results of scanning are displayed on the screen of the recording device in real
time and then the results of scanning are saved to file for processing and printing.
The device can be operated with the ambient temperature range from -20ºC to
+50ºC at the relative
humidity up to 95%.
• Geo radar
• It can be used by army and policy squads for searching ammunition, hiding-
places and underground channels in outdoors territories, buildings and
constructions.
• Super wide band signals and special software for their processing along with
complex of replaceable antenna arrays implemented in geo radar provide
unique combination of searching capabilities