User manual

Smart Interface User Manual
IM-SIP-B 15
Select Speed of Response
The Speed of Response setting allows you to change the digital
smoothing filter response speed. Use a larger response time (7.2
seconds maximum) for better smoothing or a smaller response
time for faster tracking. This setting is valid for both Range 1 and
Range 2.
To enter a speed of response value:
1. Choose the Function Selector and select Write Speed of Re-
sponse.
2. In the Value to Write selector type in the desired setting in sec-
onds. (The program will automatically correct any out-of-range
settings.)
3. After entering the new value, click the Go button. Check the Re-
sponse indicator and confirm that the new value is correct.
Select Re-Read Smart Electronics
Re-Read Smart Electronics allows you to view the complete set of
constants stored within the flow meter electronics. Use this function
to check the currently connected flow meter’s configuration.
To re-read the Smart electronics variables:
1. Verify the desired range is selected. Choose the Function Se-
lector and select Re-Read Smart Electronics.
2. Click the Go button. The Smart Interface software reads the vari-
ables stored in the flow meter electronics and displays the results
on the screen.