Instruction manual

Model 5100-02-IT Combustible Gas Sensor Module
Page: 30
Baud: 38400 (Adjustable 2400 to 38400 baud)
Parity: None
Stop bit: 1
Data bits: 8
Flow Control: None
Memory map: Appendix H
Warranty:
Limited warranty: 2 years
Specifications subject to change without notice
8.2 APPENDIX B: MODEL NUMBERS, PARTS LIST & PARAMETERS
Sensor Module
Model Enclosure Relay/Connection Protection Remote
5100-02-IT - XX - XX - XX - X - X
- A1 = AL ¾” NPT - 01 = No Relays - 00 = Standard - 0 = Standard - 0 = None
- A2 = AL M20 x 1.5 - 02 = Relays - 2 = Conformal - 1 = Remote
- S1 = SS ¾” NPT - 05 = HART Option Transmitter Sensor
- S2 = SS M20 x 1.5
Options
5311-00 Rainshield
5311-02 Rainshield with calibration port
Calibration Items
1250-01 Gas Sensor Calibrator Kit
1256-01 Regulator Type A Calibrator
1260-00 Gas Cylinder – Air (Type A), 105 liters
1260-02 Gas Cylinder – Methane 50% LEL, (type A), 105 liters
1260-42 Gas Cylinder - Hydrogen, 50% LEL, (Type A), 105 liters
5358-01 Calibration Adapter - Direct, Standard
5358-50 Calibration/Configuration Magnetic Tool
5360-00 Remote Calibration Fitting
Spare Parts
SPL21813 Transmitter for 5100-02-IT
5200-02-IT-AL Sensor Assy for 5100-02-IT, AL
5200-02-IT-SS Sensor Assy for 5100-02-IT, SS
SPL21810 Enclosure, Transmitter, AL
SPL21823 Enclosure, Transmitter, SS
SPL21825 Termination Board no Relays
SPL21829 Termination Board with Relays
SPL21876 HART Termination Board
Factory Default Settings
Output = 3-wire 4-20mA source
Range = 0-100% LEL
Warning = 20% LEL
Alarm = 60% LEL
Calibration = 50% LEL Methane
Modbus = 2-wire Half Duplex at 38,400 BAUD