Instruction manual

Model 5100-99-IT 4-20 mA Module
M E
ST
M E
ST
ME
S T
ME
S T
M E
ST
M E
ST
M E
ST
ME
S T
M E
ST
M E
ST
M E
ST
M E
ST
ME
S T
M E
ST
M E
ST
ME
S T
M E
ST
ME
S T
M E
ST
ME
S T
M E
ST
M E
ST
M E
ST
M E
ST
M E
ST
ME
S T
M E
ST
Down Warm Min S.P. Function - Warm Up Time Adjust
Enter *T2.50mA
Use
S
or
T
keys to select 2.50 mA or User select
Enter Warm 1
Use
S
or
T
keys to select between 1 and 8 minutes warm up time
Down Dig Input S.P. Function - Digital Input Adjust
Enter Track
Down Tbl Out S.P. Function - 4-20 mA Output during Trouble Adjust
Mode S.P. Function - Output Units Adjust *D
Enter Sprvsd
Use
S
or
T
keys to select Supervised or Unsupervised Digital Input
Use
S
or
T
to select for 4 mA output, 20 mA output, 4 mA input or 20 mA
in
p
ut
Enter *Track * = Current selection
Enter Out: 4mA
Use [E] to calibrate analog output, adjust output level with
S
or
T
then press [E] when done
*D
Down Baud S.P. Function - RS-485 Baud Rate Adjust
Table 4-3B Set-Up Configuration
Enter *38400
Press [E] to select or [
S
] or [
T
] to select another
Enter Address S.P. Function - RS-485 Address Adjust
Enter ACK New address selected
Enter Addr:016
Use
S
or
T
keys to enter new address
RS-485 Adjustment Example
Enter Address S.P. Function - RS-485 Address Adjust *E
Use
S
or
T
keys to select Track, Zero, C1.50mA, C4.00mA or User mA
Track = Output during calibration tracks the calibration gas, Zero = Output is
Zero during calibration, C1.50mA = Output during calibration is 1.50 mA,
C4.00mA = Output during calibration is 4.0 mA
Down CalibOut S.P. Function - Output during Calibration Adjust
Mode Calib S.P. Function - Calib Adjust
Enter ACK Momentary Acknowledge of new Set Point
Enter 4mA Selects 4 mA
4-20 mA Adjustment Example
Down Calib S.P. Function - 4-20 mA Calib Adjust *D
Use
S
or
T
keys to select units of output as %LEL, %Vol, PPM, %F.S. or mA
Enter %LEL
Use
S
or
T
to select for 4 mA output, 20 mA output, 4 mA input or 20 mA
input
Enter
Enter 100 PPM
Select [E] to select or
S
or
T
to select another and press [E]
Down USER Press [E] if selecting User adjustable range
Down 10 PPM Press [E] if selecting 0-10 PPM range
Enter *100 PPM
Select [E] to select or
S
or
T
to select another and press [E]
Range Adjustment Example
Enter Range S.P. Function - Range Adjust *C
Page: 19