Instruction manual

LS300G GSM/GPRS/EDGE/HSPA+ Sierra Wireless Cellular Modem
For the Config/Port Used, use the drop-down list to select the datalogger port
you wish to use for PPP. RS-232 is the standard choice, but any port in the
drop-down list can be used.
Set the Modem Dial String to AT\APPP.
Press Apply to apply the changes.
With PPP enabled, PakBus/TCP communications use port 6785. Therefore, in
LoggerNet use :6785 after the IP address or domain name as shown below.
20