Instruction manual

LS300G GSM/GPRS/EDGE/HSPA+ Sierra Wireless Cellular Modem

2. Add a datalogger to the IPPort (PakBus® dataloggers, for example the

CR1000, require a PakBusPort).

3. Select the IPPort in the Network Map. Enter the LS300G IP address (or

domain name) and port number. The IP address and port number are input

in the Internet IP Address field separated by a colon. Preceding zeros

are not entered in the Internet IP Address (for example, 070.218.074.247

is entered as 70.218.74.247). DevConfig and the LS300G template file

configure the port number to 3001 for serial server mode. Set the Extra

Response Time to 4 seconds.

Example settings for a static IP address:

4. For PakBus® dataloggers, leave the default settings for the PakBusPort.

PakBus Port Always Open should not be checked.