Instruction manual

LS300G GSM/GPRS/EDGE/HSPA+ Sierra Wireless Cellular Modem

On the Settings tab:

• Set the RS-232 Baud Rate appropriate to the datalogger being used:

o 115.2K for CR800 Series, CR1000, CR3000, and CR6 Series

o 9600 for all others

• Enter I2GOLD (or your custom APN) in the APN field.

• Note that the default Device Port number is 3001. This is used in the

LoggerNet setup below.

Click Apply to save the settings. Reset the modem by briefly pressing the

Reset button on the front of the modem or by removing power from the

modem.

4.4 Set up LoggerNet

The LoggerNet Network Map is configured from the LoggerNet Setup screen.

Setup has two options, EZ (simplified) and Standard. Click on the

View menu at the top of the Setup screen, and select Standard

view.

From the LoggerNet toolbar, click Main | Setup and configure the Network

Map as described below.

1. Select Add Root | IPPort.

NOTE