Owners manual

and carefully remove cloth pad (L) from steamer head (K). Store the unit upright in a dry area.

NOTE: For storing your mop in small tight spaces, ﬁ rst release power cord from the quick release

cord wrap, then press button in the front of the unit between the lower handle tube and top of

steamer body to release the handle. Pull handle upward to remove. This may take some force.

CAUTION: The cloth pad may be very hot.

Carpet Glider

12) Lay carpet glider (N) on the ﬂ oor in an upright position with the triangular ﬂ at surface facing

downward. Place steamer head (K) on top of glider.

IMPORTANT: The carpet glider is not designed to be ﬁ xed to the ﬂ oor head for safety reasons

including preventing burns. It is designed for use on soft carpet areas only, not for hard ﬂ oor

surfaces.