Mobile User's Guide

XT55 GPS Startup User’s Guide
Confidential/Released
s
mo b i l e
XT55_GPS_startup_ug_V02a Page 8 of 13 28.06.2004
The appearing dialog box shows the default settings for the selected COM port.
NOTE: The pre-defined factory settings of the XT55 GPS port SDn1 (4800bps, 8 data bits,
no parity, 1 stop bit, no flow control) cannot be changed, otherwise no connection to the
XT55 GPS port will be established.
Figure 2: COM port transmission settings
If a connection to the XT55 module has been established, the transmitted protocols will be
displayed.
Figure 3: Displaying the transmitted NMEA protocols