Basic Documentation

99 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure 2021-06-21
Search by secondary address:
You can select or clear a search by secondary address (serial number).
To shorten the search time, you can limit the search range for secondary
addresses using the settings for Digit 1 through Digit 8.
Search baud rate:
You can enter the corresponding baud rate for the device search if devices deviate
from the default baud rate (refer to the device documentation for the baud rate).
You can search for devices by a specific baud rate (300 / 600 / 1200 / 2400 / 4800 /
9600 bps).
Multiple baud rates can be selected as well. The device search is longer, if multiple
baud rates are selected at the same time.
Click Start scan.
Progress is indicated by the progress bar.
All found devices are listed at the conclusion of the device search. Select one or
more devices and Add, to add the new devices to the device list.
Devices that are not saved are rejected.
The following must be listed at a minimum for any found device:
 Serial number
 Primary address
 Medium
 Manufacturer code with optional device image
 Automatically generated device name
Search results
Important