Basic Documentation

96 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure Web server browser operation 2021-06-21
Query intervals are required to generate reports. A query interval can be
individually defined for each device. The interval determines the intervals at which
the device read outs are saved.
Additional information on query intervals is available in Section 'Creating reports',
pg. 116.
Settings that cannot be changed:
 ID Device: Displays the device serial number
 Read by: Displays whether the device is read via the primary or secondary
address.
 Medium: Displays the medium measured by the device.
 Primary address: Displays the device's primary address (1…250)
 Baud rate: Displays the transmission rate between the device and web server.
 Manufacturer code: Displays the manufacturer's code (if included in the
database).
 Version (HEX): Displays the device version.
 Plant diagram: Displays the plant type.
The following application blocks are available:
 1. Setpoint
 2. Plant I/O
 3. Device ID and error
 4. General configuration
 5. Device configuration
 6. Heating circuit 1 and 2
 7. DHW
 8. Connection settings
 9. Load management
 10. Scheduler program for heating circuit 1
 11. Scheduler program for heating circuit 2
 12. Scheduler program for DHW
 13. Service
Click button 'Open all' to expand all application block and display individual data
points (drop-down list).
Note
Data point settings