Basic Documentation

91 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure 2021-06-21
Click the device line to view the settings for the device:
Free text settings:
 Device name: You can assign a name to the device
(e.g. Apartment 123).
 Description 1: Device description as indicated in the device list.
 Description 2: Additional description
 Scan interval: 15 min. / 60 min., 6 h, 12 h, 1 day, 7 days, 1 month
 Installation date.
 The device image can be set by clicking the as needed. You can select the
appropriate image from the web server device database.
Click 'Save' to save the edited values.
Query intervals are required to generate reports. A query interval can be
individually defined for each device. The interval determines the intervals at which
the device read outs are saved.
Additional information on query intervals is available in Section 'Creating reports',
pg. 116.
Settings that cannot be changed:
 ID Device: Displays the device serial number
 Read by: Displays whether the meter is read via the primary or secondary
address.
 Medium: Displays the medium measured by the device.
 Primary address: Displays the device's primary address (1…250)
 Baud rate: Displays the transmission rate between the device and web server.
 Manufacturer code: Displays the manufacturer's code (if included in the
database).
 Version (HEX): Displays the device version.
 Main Value: You can select the value for display on the Plant status/Wired
devices overview (see page 69).
Device settings
Note
Data Points settings