Basic Documentation

88 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure Web server browser operation 2021-06-21
The web server can communicate directly with the fixed IP address or domain if a
fixed IP address or domain (e.g. www.myname.com) is available for the Internet
connection.
DNS servers are available on the Internet for dynamic IP addresses that connect
customized domain names with dynamic IP-Addresses of the web server.
You must first set up an account at the provider to use the DynDNS server.
The web server must inform the service of changes to the dynamic IP address for
the web server to communicate via the setup DynDNS service. The Dynamic DNS
must be set on the web server as follows:
 Enable Dynamic DNS settings: Allows web server to use a dynamic DNS service
 Server DynDNS: The following two Dynamic DNS providers are available:
- No-IP.com
- DynDNS.com
 Domain name: Name provided to you by your dynamic DNS supplier.
 Username: Username for accessing the dynamic DNS server
 Password: Password for accessing the dynamic DNS server
Be careful when changing these settings! Ask your network administrator for the
required data on network configuration.
Click 'Save' to confirm changes to the above parameters.
Dynamic DNS service must be set up if web server is not connected to Synco IC
and WTV remote access is not needed. This ensures that the web server can
always be found on the Internet
Dynamic DNS
Dynamic DNS settings
Registration
Report dynamic address
Important
Note