Basic Documentation

87 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure 2021-06-21
The following data must be saved on web server to send emails:
The following email server settings are available:
 SMTP server name: The address for the SMTP server.
 SMTP port: The port number used by the SMTP server.
 SMTP security: Selection of either SSL or TLS security. The setting NO sends
the emails without encryption; do not use this setting for security reasons.
 SMTP authentication: Enter whether the SMPT server requires authentication.
 Sender name: Name of the sender that appears in the from email address in the
email.
 Sender email address: The email address of the sender
Be careful when changing these settings! Check with your email provider for the
required email server settings.
Click Save to confirm changes to the above parameters.
You can test the server connection to the email server by sending yourself a report
to an email address of your choice.
The results are displayed as soon as the message is sent:
The settings listed above are required for the web server to send alarms and
reports directly by email.
The settings above are not required if web server is integrated in Synco IC (you
can query the reports via Synco IC).
Email configuration
Email server settings
Important
Email server settings
Note