Basic Documentation

77 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure 2021-06-21
Parameters outside the value range are highlighted in red. No data is written to the
controller in the event of erroneous values.
The scheduler defines when a part of the plant, e.g. a heating circuit or DHW plant,
is operated.
For example, you can program a time switch for individual days of the week
(Monday through Sunday) in the pane 'Scheduler for heating circuit 1'. Enter the
start time and end time of operation. Multiple entries per day are possible. You can
individually program the time switch for each day. Click 'Write' to save the entered
parameters and write them to the controller.
To apply the scheduler for Monday to other days of the week, click and select
the option 'Monday to Sunday' or 'Monday to Friday'.
For example, to copy the scheduler settings for heating circuit 1 to heating circuit 2,
click in the pane for 'Scheduler for heating circuit 1'. Select 'Apply this scheduler
to:' and click 'Copy'.
Click 'Write' to copy the settings to the scheduler and write them to the controller.
Create a backup of the parameters to restore the setting parameters at any time.
Note
Scheduler
Note