Basic Documentation

74 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure Web server browser operation 2021-06-21
In the 'Configuration' pane, various setting parameters for RVD controllers can be
displayed, edited, backed up and restored.
The data from the last readout of the controller is displayed (see last readout
timestamp). Click 'Readout now' to start manual readout.
The 'Configuration' pane is divided into:
- Back and restore controller settings
- Plant-specific setting parameters (e.g. for heating circuits or DHW, etc.)
- Schedulers for operation (e.g. heating circuit or DHW, etc.)
The 'Program switch' indicates whether the scheduler is active.
You can back up the current controller settings in this pane and eventually write
them to the controller (restore). Values from other controllers can be taken over.
The function 'Backup and restore' is only visible if you are logged on as
administrator or Maintainer.
You can back up the current controller settings in the menus 'Plant status' >
'Controller' > 'Configuration' and 'RVD configuration and settings'.
To back up the current controller settings, click 'Create'.
The file name suggested by the system is composed by default of the following:
- Date and time
- Device type
- Device name
- Number of the plant diagram
To edit the suggested file name, click . The file name that you enter is
automatically supplemented with the current date and time. To export the backup
file and save it to desktop, click 'Export'.
You can only create backup files from the last read controller settings. No backup is
possible if certain controller settings are highlighted in blue or red.
You must write the settings to the controller before you can create a backup file.
Configuration
Note
Backup and restore
controller settings
Note
Create backup
file
Note