Basic Documentation

71 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure 2021-06-21
The following information can be read per line (i.e. per M-bus wireless devices):
• Medium
• Serial number
• Availability of device with optional image
• Device name
• Description
• Main value (=> selectable, see Section “Wireless devices, as page 100)
• Date/time of last device reading
• Device status
The following device status can be displayed:
Device is OK
Device fault
Communication error
Click a line to list additional information on a particular device.
This information cannot be changed and is summarized in three categories:
• Device information: General device information (Name, description, ID,
medium, query interval, installation date, manufacturer code, RF mode,
encryption, etc.)
• Last read out timestamp: Displays the values of the last 6 read outs.
• Alarm state: Indicates errors pending on the device and which ones are
registered and sent by email.
Query intervals are required to generate reports. A query interval can be
individually defined for each device. The “Scan interval” determines the intervals at
which the device read outs are saved.
Additional information on query intervals is available in Section 'Creating reports',
pg. 116.
You can predefine the data points you want to detail in the menu
'Settings' > 'Wireless devices' > 'Device settings' (see page 100).
Note