Basic Documentation
59 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure 2021-06-21
The DNS name server (domain name system) on the Internet connects a globally
valid name to a domain with an IP address (e.g. domain www.siemens.com with IP
address 146.254.191.150).
The setting corresponds to the IP address for the next router or DNS name server
that recognizes for its part a queried name (domain) or another DNS name server.
The setting is typically identical to the setting for the standard Gateway. Need not
be set for "DHCP = Enabled"
If the DHCP settings are deactivated, please contact your local administrator for
the specification of the parameters (default value: DNS1:8.8.8.8).
A secondary DNS name server is only defined for redundant systems. Settings are
typically empty. Need not be set for "DHCP = Enabled"
(default value: DNS2: 8.8.4.4)
The current network settings are saved and web server restarts.
You can set the following In the RF network submenu:
Enter the mesh ID. Ensure that all RF converters are on the same mesh network.
Mesh network channel: You can change the channel ID here in the event of faults.
The following settings are available in the Synco IC submenu:
Enable or disable the automation transmission of Synco IC reports to the cloud.
The Synco IC portal is available at: https://www.siemens-syncoic.com.
Displays the activation key. The activation key is required to register the web server
in the Synco IC portal.
Detailed information on integrating the web server via the Synco IC portal is
available in Section 'Web server integration in Synco IC', pg. 44.
To enable the WLAN connection, press the ESC key on the web server for at least
5 seconds.
Additional information on the web server keys is available in section 'Web server',
page 15.
The IP address and remaining time for the active WLAN connection is displayed
after enabling the WLAN connection.
Primary DNS
Secondary DNS
Save network settings
Restart
RF network
Mesh ID
Channel
Synco IC
Synco IC reports
Synco IC portal
Activation key
WLAN connection