Basic Documentation

58 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure Web server operation on the device 2021-06-21
The System sub-menu has the following settings:
Enter the current date of the web server.
Enter the current time of the web server.
Select the language on the web server display.
The language set locally on the web server is also used for sending emails and to
generate reports and alarm notifications. As a result, it is important to select the
correct language during web server commissioning.
You can change the local access code on the web server at any time for security
reasons.
Additional information is available in section 'Operating', pg. 49.
You can reset the user account on the local display if you have forgotten the login
data for web server access. You must re-register after resetting the user account.
For details, see section 'Operating, Reset user account, pg 49.
The LAN sub-menu has the following settings:
Enable or disable the DHCP client on the web server.
The web server draws its IP address automatically from the DHCP server (router) if
the DHCP client is enabled.
The following parameters must be entered manually if the DHCP client is disabled:
Web server IP address. Is not set for "DHCP = Enabled" (default value:
192.168.1.110)
The standard gateway represents the interface between the local and public
network. You typically enter the IP address for the router here. Need not be set for
"DHCP = Enabled" (default value: 192.168.1.1)
The IP subnet mask sets the size of the network. Need not be set for "DHCP =
Enabled" (default value: 255.255.255.0)
System
System date
System time
Select language
Important
Change access code
Reset user account
LAN
DHCP
IP address
Standard gateway
Network mask