Basic Documentation

56 / 130

Siemens M-bus level converter and M-bus web server A6V11157985_en--_f

Smart Infrastructure Web server operation on the device 2021-06-21

Select the M-bus addressing type used in the scan:

Primary + secondary address / Primary address / Secondary address

A list of devices found is displayed after the meter scan is finished.

Press OK to save all newly found meters and add them to the device list. The ESC

button does not add the newly found meters to the device list.

To edit meter settings over web operation, see menu Settings / Wired devices /

Device settings (see page 89 et seq.).

Select the RF search main menu and press OK to start the search for RF devices.

Select the operation mode. Ensure that the operation mode for M-bus (C+T/S-

mode) is the same for both the RF converter as well as the devices on the RF

network.

The following values are available: S, T, C+T, C+T & S.

Select the duration of the search.

Values 1 to 24 are available.

You can limit the search and only display devices in installation mode by selecting

SND_TR: Function.

Scan type

Check meters and save

Operation mode

RF search duration

Installation mode