Basic Documentation

54 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure Web server operation on the device 2021-06-21
List of saved meters. Each meter is identified by the first 8 digits of the
serial number (e.g. 05434563).
The following symbols are displayed in the first column:
OK: The last readout was successful.
Device error: An error was reported to the web server via M-bus.
Communications error: No communications with the device.
You can navigate through the list with the and navigation buttons.
Press OK to go to the data for the selected meter.
The first panel provides general information on the selected meter, including
the complete fabrication number/secondary address of the meter (SN),
primary address (PA), designation (D1, D2), medium (MM) and readout
frequency (TI).
Displays the values from the last meter readout, if available.
The and navigation buttons take you to additional meter fields for this
readout time.
The following graphic explains in detail the display setup for meter fields.
The display only displays meter fields where the option Display data is selected.
The setting is selected over web operation in the menu Settings / Wired devices /
Device settings / Meter data settings / Data point settings (see page 89 et
seq.).
The setting is selected over web operation in the menu Settings / Wired devices /
Device settings / Meter data settings / Data point settings (see page 89 et
seq.).
Displays the date of the meter readout.
Important
Device name
Readout date
Device name
Readout date
M-bus description
Readout value
Readout time.
M-bus storage (ST)
M-bus tariff (T)
M-bus subunit (SU)