Basic Documentation

44 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure Web server commissioning 2021-06-21
8.6 Web server integration in Synco IC
The web server is registered in the cloud after entering the activation key for the M-
bus web server WTV676 in the Synco IC portal.
This billing data, trend data, and alarm messages (reports) is transmitted to Synco
IC per customized settings as well as the distribution of information to the
corresponding customers via email. You must select "Enable Synco IC reports"
check box on the web server. Additional information on the automatic transmission
of Synco IC reports is available in Section "Setup automatic reports", as of pg. 109.
8.6.1 Setup access
Registration is required for the first-time use of the Synco IC portal. An email
address and activation key for web server must be entered to register.
Additional information on the activation key is available in Section "Enable web
server in Synco IC", pg. 33.
After registration, you must enter a password for future access to the portal.
Additional data can be entered on the user and plant. The Synco IC-Portal is
located at: https://www.siemens-syncoic.com/.
8.6.2 Activate plant
Activate your plant in the Synco IC portal, under the "Administration" menu.
Additional information on activation and entering plant data is available in the
Synco IC User's Guide, document A6V10500249. See Section "Reference
documents", pg. 7.