Basic Documentation

39 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure 2021-06-21
8 Web server commissioning
Ensure the following prior to commissioning the web server:
 The electrical connection must be fused (fuse or circuit breaker)
 The power supply must be at the device's rated voltage.
 The power supply must be sufficient to operate the device.
 The router (if available) must be configured as per the description.
 The network plug must be wired correctly to exchange data and connected to
the ETH connection on the web server
 In the event a level converter is connected to the web server, connect it as a
slave on the web server's master output.
8.1 Connect web server to PC or LAN
Web server has an Ethernet connection to directly connect to a local PC or
connection to a PC over LAN.
Default settings for connecting to the web server:
IP address: 192.168.1.110
Network mask: 255.255.255.0
IP address assignment: Static
Proceed as follows to connect a PC to web server:
 Use an Ethernet cable per standard T568A or T568B (1:1 or crossover) to
connect web server with a PC (directly) or LAN. If using the LAN, also connect
the PC to the LAN.
 Check whether an IP address is displayed on web server in menu System info,
under LAN Status.
Prerequisites
IP: 192.168.1.1
IP: 192.168.1.xxx
IP: 192.168.1.110
. . .