Basic Documentation

29 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure 2021-06-21
5.4.2 Level converter WTX631..
The level converter can be connected to a PC as master via interface RS-232 or
RS-485 to read out device data.
A Level converter (interface RS232 or RS485)
B PC or M-bus device
The TX Open module integrates M-bus devices via RS-232 or RS-485 interface to
in the Desigo CC management platform.
Addtional information on the Desigo CC management platform is available in the
Engineering guide 'Desigo TM TX Open, TX M-bus', document CM110572. See
section 'Referenced documents', page 7.
Level converter WTX631.. cannot be read out the device data with the ACT531
software.
5.5 Connect web server to PC
A network cable is used to connect the web server and PC/LAN. See Section
“Connect web server to PC or LAN”, page 39
Note