Basic Documentation

119 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure 2021-06-21
Report all data displays each device with two lines: The first line describes the
content and the second the corresponding values. The numbers of columns vary
for each device depending on device type.
All data points are listed that can be read.
The numbers in the reports are depicted as follows:
 Period as a decimal point separator.
In principle, there are two types of trends: History trends and trends in the future.
A history trend file includes an evaluation of meter data in the past.
You can evaluate meter data in the past at any time. The data remains on the web
server and is not sent to Synco IC.
In menu "Manual reports", select report type "Trend file" and set a start and end
date. Finish by clicking "Create report".
Additional information on manual reports is available in Section "Manual reports",
pg. 107.
A trend file in the future includes an evaluation of meter data over a timeframe in
the future.
You can set a timeframe in the future at any time to read the meter data. The web
server generates a web server once the timeframe expires and sends the file to
Synco IC.
To generate a trend file in the future, enter a start and end date with time in the
future in the "Automatic reports" menu.
Additional information on automatic reports is available in Section "Setup automatic
reports", pg. 109.
Information on Synco IC is available in document A6V10500249, see Section
Reference documents, pg. 7.
A history or future trend file is created one time.
To create a new trend file in the future, select "Trend file" and set a new timeframe
in the future.
History trend files are generated with "Create report" and are available
immediately.
Report "All data"
Note
Trend file
Note