Basic Documentation

118 / 130

Siemens M-bus level converter and M-bus web server A6V11157985_en--_f

Smart Infrastructure Web server browser operation 2021-06-21

The web server can only read out information that was also sent by the device via

an M-bus telegram. Check the corresponding telegram if information is missing in

the report.

The Standard report lists all read devices. A device corresponds to one line. Each

column is the same for each device. The columns with the corresponding titles are

preset. The field remains blank if the device does not report a value.

The columns must be assigned to the corresponding data point in the device

settings.

Check the data points if a meter does not appear in the standard report.

In the menu "Settings > Wired devices" or "Wireless device", you can define in the

column "Standard report – Data point mapping" the value (data point) per meter to

list and under what title in the standard report. The standard report permits the

setting up of a summary report using a standard format.

A Custom report displays each device with two lines: The first line describes the

content and the second the corresponding values. The number of columns varies

by device depending on the device and selected data points.

Only data points defined in Section 12.4.3 are listed.

For the Custom report, you can select in the column "Custom report – Data point