Basic Documentation

112 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure Web server browser operation 2021-06-21
In addition to automatic transmission of reports per FTP server and email, reports
can also be transmitted automatically to the cloud Synco IC and stored at a
centralized location.
Enable Synco IC reporting
Enable the check box "Enable Synco IC reporting", if reports are
automatically transmitted effective immediately.
Simply clear the check box to stop the transmission of reports at any time.
The following options are available for setting report transmission:
Post time
Select the time to send the reports (applies to all reports).
You can send the time to within 15 minutes.
Click 'Save' to save the entries
Status of Synco IC reporting
The status for automatic transmission of Synco IC reports changes to
"enabled" when the "Enable Synco IC reports" is check box is selected.
You can enable or disable the "Enable Synco IC reporting" check box at
any time. The status changes to "Manually stopped" after disabling and no
more reports are transmitted to Synco IC.
The status "Not enabled" displays at first log in.
Activation key
The activation key is required to register the web server in the Synco IC
portal. Additional information on web server registration is available in
Section "Web server integration in Synco IC", pg. 44.
Set up Synco IC reports