Basic Documentation

111 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure 2021-06-21
Set up email address for automatic report transmission
Select Enable automatic reports via email to send a report to one or more
email addresses and enter the corresponding email addresses including the
subject line.
You can separate individual addresses with the semicolon (;) if a report is
sent to multiple addresses.
Click
Save
to save your entries.
The following settings are required to generate automatic reports:
 Report type: Select between (for details, see “Manual reports”, page 107):
– Standard report
– Custom report
– Report "All data"
Additional information on the various report types is available in Section “Creating
reports”, page 116.
 File type: Select one of the following file formats:
– .csv format: Exports the data as a .csv file.
– .xls format: Exports the data as an .xls file.
– .txt format: Exports the data as a .txt file.
 Post time: The time the readout of the selected devices is performed and the
report file is generated and sent out.
Please note that this can take several minutes depending on the number of
devices and the M-bus baud rate.
Click Save to save your entries.