Basic Documentation

104 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure Web server browser operation 2021-06-21
For device search, you can select whether to search for an RF converter on a
specific mesh network or for a wireless meter that communicates with a specific RF
converter within an M-bus radio network.
The RF converter and wireless devices communication over the M-bus wireless
network.
Settings that can be freely edited:
• Global encryption key: The global encryption is used during the
automatic search.
• Global AES Key 1: The global encryption key is used during the
automatic search.
• Global AES Key 2: The global encryption key is used during automatic
search.
• M-bus wireless operation mode: You can enter the M-bus operation
mode. The following values are available: C+T, S, T, C+ T, S & C + T.
You can further limit the search to devices in installation mode only
(SND_IR).
• Acquisition phase duration: You can enter the duration of the device
search in hours (1 to 24).
Click Save to save the changed values.
You can select both check boxes as an option to further limit the device scan:
 "During this scan, accept only devices that transmit in Installation mode
(SND_IR)': Use this function for plant extension or when exchanging devices.
The scan is only by new devices in installation mode.
"Read device with walk-by telegrams only": This function is only used to scan for
devices that communicate in walk-by mode. The goal is for remote readout of walk-
by device over web server access.
Device search
Configure M-bus network
Option