Basic Documentation

102 / 130
Siemens M-bus level converter and M-bus web server A6V11157985_en--_f
Smart Infrastructure Web server browser operation 2021-06-21
Free text settings:
 Device name: You can assign a name to the device
(e.g. Apartment 123).
 Description 1: Device description as indicated in the device list.
 Description 2: Additional description
 Scan interval: 15 min. / 60 min., 6 h, 12 h, 1 day, 7 days, 1 month
 Installation date.
 The device image can be set by clicking the as needed. You can select the
appropriate image from the web server device database.
Click Save to save the edited values.
Query intervals are required to generate reports. A query interval can be
individually defined for each device. The interval determines the intervals at which
the device read outs are saved.
Additional information on query intervals is available in Section 'Creating reports',
pg. 116.
Settings that cannot be changed:
 ID Device: Displays the device serial number
 Medium (HEX): Displays the medium measured by the device.
 Manufacturer code: Displays the manufacturer's code (if included in the
database).
 Radio mode: Indicates the device’s radio mode.
 Encryption: Indicates whether encryption is enabled or disabled
 Encryption key: AES-128 key for encrypting messages.
 Main Value: You can select the value for display on the Plant status/Wireless
overview (see page 69).
 User description: The data point designation can be edited.
 M-bus description: Data point designation as per the M-bus specification
 Standard report – Data point mapping: Assigns data points to predefined
columns on the standard report. Only one data point can be assigned to a
specific column for each device. Data points with the "none" setting are not
displayed in the standard report.
 Custom Report – Data point to be included: Select the data points to be included
in the custom report.
 Trend report – Data point to be Included (x): Select the data points for inclusion
in the trend file. The (x) enables all check boxes for the entire column.
 “…”:
 Click the "…" column to display additional details (Storage, Subunit, Tariff, Type
value) on the selected data point. The details can help you come up with a
meaningful user description.
Note
Data Points settings