Environmental Declaration

EPD - Type II
Based on ISO 14021
Building Parts
WSM506-0E Ultrasonic heat meter
WSx506-BE Ultrasonic heat meter
WSM515-0E Ultrasonic heat meter
WSx515-BE Ultrasonic heat meter
WSM525-0E Ultrasonic heat meter
WSx525-BE Ultrasonic heat meter
Landis+Gyr GmbH
HEAT
Humboldtstrasse 64
90459, Germany
Management System since by
ISO 9001 (Quality) DQS
ISO 14001 (Environment) DQS
OHSAS 18001 (OH&S) DQS
Typical energy consumption 1kWh/a
Maintenance
Fire protection according to
Fire load 7MJ
20-PAP Corrugated fibreboard Folding box 58g
22-PAP Paper instruction 108g
Notes on disposal
Total weight of device variant *) see below
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
PC; GF 10% Lower housing 28g
ABS Cover 22g
TPE-S Cover seal 3g
PA; GF 40% Measuring tube 130 QN2,5 variant
PC Battery cover 12g
TPE-S Rubber mat 6g
PA; GF 40% Measuring tube 110 QN0,6 variant
PA; GF 40% Measuring tube 110 QN1,5 variant
EPDM O-Rings 2g
PPS Cable screw connection 3g
PBT; GF 30% Transducer cover 25g
EPDM Flat rubber seal 110 variant
EPDM Flat rubber seal 130 variant
Steel >5% alloyed; blank Steel components 110 variant
Steel >5% alloyed; blank Steel components 130 variant
Cu Copper Components 1g
Steel Seal 2g
Li-ion 1st battery / accumulator 35g
Cu/PVC Cable / wire 54g
Process control
Metals
Product use
Plastics
Risk of fire
Power required to operate the device is supplied by batteries
EN60730
Product
One-way, recyclable
Environmental
Product Declaration
Type of equipment /
Product No.
Not necessary
Others
Materials
Packaging
Restricted Page 1/2