Environmental Declaration

EPD - Type II
Based on ISO 14021
Building Parts
Cu/TPE-U Cable / wire 67g
Ceramic Piezo 2g
CU/PVC Cable M-Bus variant
FR4; halogenated; solder SnAgCu PCB-A 28g
FR4; halogenated; solder SnAgCu PCB-A wM-Bus variant
*Variant parts list
[g]
Total weight of device
Measuring tube 130 QN2,5
Measuring tube 110 QN0,6
Measuring tube 110 QN1,5
Flat rubber seal 110
Flat rubber seal 130
Steel components 110
Steel components 130
Cable M-Bus
PCB-A wM-Bus
Comments
8000078917-AB-002 02.07.2020
The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must
not be disposed of as unsorted municipal waste. Regarding disposal, use the systems setup for collecting electronic
waste.
Observe all local and applicable laws.
Disposal
PCBAs (Printed Circuit Board
assembled)
Regulation (EC) No. 1907/2006 (REACH)
The device is low-halogen with exception of:
2x PCB (TBBA); 2x PVC-Cable; Battery
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.
Legal Disclaimer: This declaration is for information purpose only.
Landis+Gyr GmbH therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent under
the law.
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular
composition for a particular period.
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive, including the 4 phthalates added to
Annex II in 2015.
The device contains the following substances of the candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the
Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) in concentrations above 0.1 % w/w. Contained REACH candidate
substances, including those which will become known at a later date, are listed on the delivery note.
Lead titanium zirconium oxide, CAS-Nr.12626-81-2
(Status according to the creation date of this document.)
34
6
2
7
6
WSM525-0E
366
73
2
2
34
53
7
53
WSM515-0E
345
2
34
6
7
2
6
54
2
54
6
WSM506-0E
345
WSx515-BE
386
6
WSx506-BE
386
WSx525-BE
407
73
Restricted Page 2/2