Installation Instructions

Installation Instructions
Document No. 563-003
January 12, 2007
Wireless Fiel
d Panel Transceiver (FPX)
(Version 1.x)
Channel
Network I.D.
24 Vac 1.2VA
E H N
WLAN0006R1
Figure 1. Wireless Field Panel Transceiver (FPX).
Product Description
The Wire
less Field Panel Transceiver (FPX) is
mounted
at or near the field panel and is powered by
24 Vac. T
he antenna can be either mounted directly
to the ra
dio or mounted remotely for installations
where th
e location of the FPX causes the antenna to
be shie
lded—for example, when the FPX is mounted
inside
a field panel enclosure.
Produc
t Numbers
563-00
5
Wirele
ss Field Panel
Transc
eiver (FPX)
(Vers
ion 1.x)
563-007 Direct Mount Antenna
563-008 Remote Mount Antenna
Trans
ceivers do not come with antennas.
Anten
nas must be ordered sepa ra tely.
Accessories
563-027
Pre-termin ated Ca ble K it
Includes two 14” cables:
– Power
– Communication
Warning/Caution Notations
WARNING:
Personal injury/loss of life may occur if you
do not follow the procedures as specified.
CAUTION:
Equipment damage or loss of data may
occur if you do not follow the procedures
as specified.
Expected Installation Time
10 minutes
Required Tools and Materials
• Electro-static discharge wrist strap
•Smallflat-blade screwdriver
• Cordless drill/d riv er set
Prerequisites
• All wiring must conform to NEC and local
codes and regu la tio ns.
• 24 Vac Class II power source is available.
• Any application specific hardware or device
is installed.
I
tem Number: 563-003, Rev. BA
P
age 1 of 4