User Manual

5
Siemens
A6V107
86229_en
--
_e
Building Technologies 2017-05-12
Display sleep mode
The devices are delivered ex factory in sleep mode. Measuring operation is inactive.
Display loops sleep mode
Sleep mode
Measuring operation inactive
2 S
Due date
For example, December 31
2 S
Variable display 2 second, see "Overview
variable displays"
FS = Code for walk-by and AMR (S-mode)
FC = Code for walk-by and AMR (C-mode)
AL = Algorithm, no RF system available
3 = Code for WHE3x algorithm
4 = Code for WHE4x algorithm
1 = Code for one-sensor measuring system
2 = code for two-sensor measuring system
Special displays
Error messages
"Err 1" appears constantly. All other error messages are
displayed in quick succession alternating with
consumption values.
0.5 S
Consumption display suppressed
Is displayed in the event of an error in place of invalid
consumption values, depending on the setting made.
0.5 S
End of battery life
Is displayed after the end of service life, alternating with
the consumption values, depending on the setting made.
0.5 S
Tampering or housing opening
Is displayed in the event of tampering either as clear
text, alternating with the consumption values, or by the
indicator "c" shown discretely on all displays, depending
on the setting made.
Clear text
0.5 S
Example: Display "current value" with "c".
Discrete
0.5 S
Data interface
(IrDA close range interface)
This display indicates an active close-range interface. 10 S