Operating Instructions

ENSiemens Building Technologies A6V10816676_----_d 109
Additional parameters for devices with integrated M-Bus
(not add-on modules)
Level Display
Primary addresses for heat, cold, impulse 1, impulse 2 L4
Additional parameters for devices with solar adaptation
Share of glycol or brine L3
Commissioning
• Open the ball valves, switch the heating on and open the radiator valve.
• Checktheinstallationorairtightnessanddirectionoo
• Sealthetemperaturesensorandometeringelementtoprotectitrom
manipulation.
• Remove the installation cover from the meter housing.
• Note the installation date, the meter numbers, any seal numbers, the old and
new meter statuses.
• Dispose of the used device in accordance with national regulations.