Manualshelf

Data Sheet for Product

ManualsBrandsSiemens ManualsMetering devicesImpeller and capsule type heat/cooling energy meters and RF add-on modules
12345678910
3
Building Technologies
CE2N5323_en--_b
2018-01-23
Processor
The same standard processor with a built-in service unit is used for all flow rates.
Infrared interface
Consumption meters with optical close-range interface must be read out on site. The meter
is read out and configured with the WFZ.IRDA-USB optical reading head and the associated
ACT50 software.
Module interface
Each meter is equipped with a module interface. The meter can be read out from a remote
location by installing the optional add-on module.
Tampering
The meter is protected by a factory-fitted seal.
Function check
The temperature is acquired at 36-second intervals (or optional, every 6 seconds). The flow
is acquired continuously. The amount of energy supplied is displayed in real time. Any errors
are immediately displayed.