User's Manual

Industry Automation and Drive Technologies - SCE
TIA Training Document Page 19 of 65
Module E11
Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and
RF180C
14. Now, drag the PROFINET IO System (100) module tier toward the right and from the folder
PROFINET IO, insert the SIMATIC RFID module RF180C into the module tier by dragging it
there.
If module RF180C should not yet be selectable, it first has to be inserted by a data carrier, using
the menu "Options“ Install GSD files.
15. Then, double click on the inserted module and change the device name to RF180Cx110 and the
IP address to 192.168.0.110
16. By clicking on '
’, the hardware configuration is saved and compiled.