User's Manual

Industry Automation and Drive Technologies - SCE
TIA Training Document Page 15 of 65
Module E11
Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and
RF180C
9. Next, we drag the ’CPU 315F-2 PN/DP’ to the second slot.
The order number and the version of the CPU are inscribed on the front of the CPU.
(→ SIMATIC 300 → CPU-300 → CPU 315F-2 PN/DP → 6ES7 315-2FH13-0AB0 → V2.6)
10. When entering the CPU, the following window appears. In this window, we do the following:
assign to CPU 315F-2 PN/DP an ’IP- address’, specify the ’Subnet screen form’ and select the
’Ethernet’ that has already been set up. Optionally, a ’Router address’ can be selected for
network-overarching communication. Confirm your entries with ’OK’ (→ IP address:
192.168.0.100 → subnet screen form: 255.255.255.0 → Ethernet(1) → Don’t use a router → OK)