Washing machine WM10K200GC siemens-home.com/welcome HQ ,QVWUXFWLRQ 0DQXDO DQG ,QVWDOODWLRQ ,QVWUXFWLRQV ens-home.
Your new washing machine Explanation of symbols You have selected a washing machine from Siemens. : Warning! Please take a couple of minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands of the Siemens brand, each washing machine that leaves our factory is inspected thoroughly to ensure that it functions properly and is in perfect condition. Additional information about our products, accessories, spare parts and services can be found at: www.
en Contents enI structionManual ndInstal tionI structions 8 Intended use. . . . . . . . . . . . . . . . .4 ( Safety instructions . . . . . . . . . . .5 1 Washing machine . . . . . . . . . . . . . . . . 9 Control panel . . . . . . . . . . . . . . . . . . 10 Display panel . . . . . . . . . . . . . . . . . . 10 Operating the appliance . . . . . . 17 Preparing the washing machine . . . .17 Select programme/switch on the appliance. . . . . . . . . . . . . . . . . . . . . .
en Intended use 4 After-sales service . . . . . . . . . . 28 [ Consumption rates . . . . . . . . . . 29 Energy label. . . . . . . . . . . . . . . . . . . 29 Consumption values table . . . . . . . . 30 Efficiency test programmes for cotton fabrics . . . . . . . . . . . . . . . . . . . . . . . 30 Spin efficiency class . . . . . . . . . . . . 31 J Technical data . . . . . . . . . . . . . . 31 5 Positioning and connecting. . . 32 Included with the appliance . . . . . . . 32 Safety instructions . . . . . . .
Safety instructions ( Safety instructions yteS fa Electrical safety : Warning Danger of death! There is a risk of electric shock if you touch live components. ■ Never touch or hold the mains plug with wet hands. ■ Only pull out the mains cable by the plug and never by the cable, as this could damage it. Risk of injury : Warning Risk of injury! ■ When the washing machine is lifted by its protruding parts (e.g. the washing machine door), the components may break off and cause injuries.
en ■ ■ Safety instructions Cut through the mains cable and remove it, along with plug. Destroy the lock on the washing machine door. : Warning Risk of suffocation! Children may become wrapped in packaging/film or packing parts if allowed to play with them, or they may pull them over their heads and suffocate. Keep packaging, film and packaging parts out of the reach of children. : Warning Risk of poisoning! Detergents and care products may be poisonous if consumed.
Environmental protection ■ 7 Environmental protection lam noter iE vn noi tcetorp Packaging/used appliance ) Dispose of packaging in an environmentally-responsible manner. This appliance is labelled in accordance with the European Directive 2002/96/ EC on Waste Electrical and Electronic Equipment (WEEE). The directive provides a framework for the collection and recycling of old appliances, which is valid across the EU.
en Main points in brief Y Main points in brief nM ia stniop 1 ni @ Connect the mains plug. -------- 2 @ -------- 3 @ @ -------- 4 Load the laundry . Close the washing machine door. @ Start the programme. Select additional settings, if necessary. Change the programme default settings, if necessary. @ Open the washing machine door and remove the laundry. Open the door. @ @ @ Programme end @ Sort the laundry. Observe the maximum load on the display panel. Add detergent.
Getting to know the appliance en * Getting to know the appliance gni tG te ot w onk eht ecnai lpa Washing machine # 6 7 ( Detergent drawer ~ Page 18 8 Washing machine door with window handle 0 Controls/display elements 9S Open the washing machine door 9T Close the door @ Service flap 9
en Getting to know the appliance Control panel # + ( Programme selector for selecting a programme and for switching the machine on and off @ Start/Nachlegen (Start/ Reload) ! for starting, interrupting (adding laundry) and cancelling a programme 0 °C (temperature), 0 (spin speed), 0 (Ready in time) for changing the programme default settings H Display panel for settings and information ( 8Speed, ¦ Eco, æ Knitterschutz (Anticrease), additional programme settings Display panel Settings for the
Laundry Z Laundry yrdnuaL Prepare the laundry Caution! Damage to the appliance/fabrics Foreign objects (e.g. coins, paper-clips, needles, nails) may damage the laundry or components in the washing machine. Therefore, note the following tips when preparing your laundry: ■ Empty pockets. ■ ■ ■ ■ ■ ■ Look out for metal items (paperclips, etc.) and remove them. Wash delicates in a laundry bag (tights, underwired bras, etc.). Close any zips, button up any cover buttons. Brush sand out of pockets and collars.
en Detergent C Detergent tnegreD te Correct selection of detergent The care label is crucial for selecting the correct detergent, temperature and treatment of the laundry. ~ See also www.sartex.ch If you visit www.cleanright.eu, you will find further information on detergents, care products and cleaning agents for domestic use. ■ ■ ■ ■ ■ Standard detergent with optical brighteners Suitable for boil-washable white laundry made from linen or cotton Programme: Cottons/ cold - max.
Overview of programmes en / Overview of programmes w eivO rev fo m am rgsoerp Programmes on the programme selector Programme/type of laundry/information Settings Name of programme Brief explanation of the programme and for which fabrics it is suitable. Max. load; * Reduced load for the G Speed setting Temperature that can be selected Spin speed that can be selected; ** Max.
en Overview of programmes Programme/type of laundry/information Settings W Í Wool Hand- or machine-washable fabrics that are made of wool or contain wool; Particularly gentle wash programme to prevent shrinkage of laundry, with longer programme breaks (fabrics rest in the detergent solution) Notes ■ Wool is of animal origin, e.g.: Angora, alpaca, llama, sheep. ■ Use a detergent which is suitable for machine washing wool. Max. 2 kg O Rinse Extra rinse with spin Max. 7 kg Cold - 40 °C – – – ...
Overview of programmes Programme/type of laundry/information Settings ; Hygienic Hard-wearing fabrics Note: Extended washing and rinsing with a higher water level for particularly sensitive skin Max. 7 kg/5* kg k Shirts/Business Non-iron shirts or blouses made of cotton, linen, synthetic fibres or blended fabrics fibres or blended fabrics Note: Use the Delicates/Silk programme to wash shirts/blouses made of silk/delicate fabrics. Max.
en Programme default settings 0 Programme default settings m am rgoeP r t luafed The temperature, spin speed and programme duration ("Ready in" time) for all programmes are preset at the factory. These are displayed in the display panel after selecting the programme. You can change the default settings as follows. Temperature Depending on the programme progress, you can change the preset temperature (in °C) before and during the programme.
Additional programme settings 2. The symbols YES and ¼ light up on the display panel. The washing machine door can be opened and laundry can be added. 3. Close the washing machine door. 4. Press the Start/Reload ! button. The preselected time continues to run. en 1 Operating the appliance gni taO rep eht ecnai lpa Preparing the washing machine Note: The washing machine must be correctly installed and connected.
en Operating the appliance Change the programme default settings You can use the default settings or change them. To do this, repeatedly select the corresponding button until the required setting is displayed. The settings are activated without needing to be confirmed. They are not saved when the appliance is switched off. Programme default settings ~ Page 16 Overview of programmes from ~ Page 13 Notes ■ Mix items of laundry of varying sizes.
Operating the appliance Measure the detergent and care products according to: ■ Water hardness; ask your water supply company ■ The manufacturer's instructions on the packaging ■ The amount of laundry ■ Soiling ~ Page 12 Filling : Warning Eye/skin irritation! Detergent and care products may spray out if the detergent drawer is opened while the machine is in operation. Open the drawer carefully. Rinse eyes or skin thoroughly if they come into contact with detergent/care products.
en Operating the appliance Childproof lock ■ You can lock the washing machine to prevent the functions you have set from being changed inadvertently. To do this, activate the childproof lock after starting the programme. ■ To activate/deactivate the childproof lock, press and hold Start/Reload for approx. five seconds. The E symbol appears in the display panel. ■ w lights up: The childproof lock is active. ■ w flashes: The childproof lock is active and the programme selector was adjusted.
Sensors Removing laundry/switching off the appliance 1. Open the washing machine door and remove the laundry. 2. Set the programme selector to Off. The appliance is switched off. 3. Turn off the water tap. Note: Not required for Aqua-Stop models. Notes ■ Do not leave any items of laundry in the drum. They may shrink in the next wash or discolour another item. ■ Remove any foreign objects from the drum and the rubber seal – risk of rusting.
en Setting the signal M Setting the signal gni t S te eht langis 1. Einstellmodus für die Signallautstärke aktivieren Set to Û. Press and hold the 0 button and turn one position to the right. Press and hold the button for approx. five seconds until the display elements light up. Setting mode is activated. 2. Lautstärke für Tastensignale einstellen (je nach Modell) Press the button repeatedly until the desired volume is reached.
Cleaning and maintenance descaling agent. Suitable descalers can be obtained via our website or from our after-sales service. 2 Cleaning and maintenance gninaeC l dna : Warning Danger of death! There is a risk of electric shock if you touch live components. Switch off the appliance and unplug the mains plug. : Warning Risk of poisoning! Toxic vapours can be produced by cleaning agents that contain solvents, e.g. cleaning solvent. Do not use cleaning agents that contain solvents.
en Cleaning and maintenance 2. Switch off the appliance. Disconnect the mains plug. 3. Open and remove the service flap. 4. Take the drain hose out of the retainer. Remove the sealing cap, allow the detergent solution to flow out into a suitable container. Replace the sealing cap and place the drainage hose in the retainer. 5. Carefully unscrew the pump cover, residual water may leak out. Clean the interior, pump cover thread and pump housing.
Faults and what to do about them. en if you come into contact with detergent solution and laundry. If possible, leave it to cool down. Remove the hose from the water tap. Clean the filter with a small brush. : Warning Risk of injury! You may injure your hands if you reach into the drum while it is turning. Do not reach into the drum when it is turning. Wait until the drum has stopped turning. 6.
en Faults and what to do about them. Information on the display panel Display Cause/remedial action YES The washing machine door is unlocked. It is possible to add laundry. NO ■ ■ ¼ flashes ■ ■ ■ E:17 ■ ■ ■ E:18 ■ ■ The temperature is too high. Wait until the temperature falls. Water level too high. Not possible to add laundry. If necessary, close the washing machine door immediately. To continue the programme, press Start/ Reload !. Laundry may be caught.
Faults and what to do about them. Faults Washing machine door cannot be opened. Cause/remedial action ■ ■ ■ Programme does not start. ■ ■ ■ Detergent solution is not emptied. ■ ■ ■ Water not visible in the drum. Spin result not satisfactory. Laundry wet/too damp. The programme duration is longer than usual. Safety function active.
en After-sales service Faults Cause/remedial action Detergent residues on the laundry. NO appears on the display panel in reload mode. ■ ■ ■ ■ Occasionally, phosphate-free detergents contain water-insoluble residues. Select Rinse q or brush the laundry after washing. Water level too high. Not possible to add laundry. Close the washing machine door immediately, if necessary. To continue the programme, press Start/Reload !. YES appears on the display panel in reload mode.
Consumption rates [ Consumption rates noim uC stnpo setar Energy label Here, a sample energy label with explanations is provided. The energy label for your appliance can be found on the side or front of the appliance. It contains an overview of the specific values of your appliance.
en Consumption rates Consumption values table Programme Load Energy consumption*** Water*** Programme duration*** Î Cottons 20 °C 7 kg 0.39 kWh 69 litres 2 3/4 h Î Cottons 40 °C* 7 kg 1.08 kWh 69 litres 2 3/4 h Î Cottons 60 °C 7 kg 1.30 kWh 69 litres 2 3/4 h Î Cottons 90 °C 7 kg 2.30 kWh 78 litres 2 3/4 h Ó Easy-Care 40 °C* 4 kg 0.79 kWh 51 litres 2h Ñ Mix 40 °C 3.5 kg 0.51 kWh 45 litres 1 1/4 h Y Delicate/Silk 30 °C 2 kg 0.
Technical data Programme + button Load en Approx. consumption values Energy consumption Water Programme duration Î Cottons 60 °C + ¦ eco 3.5 kg 0.80 kWh 41 litres 3^h Î Cottons 40 °C + ¦ eco 3.5 kg 0.73 kWh 41 litres 3]h Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU with cold water (15 °C). The specification of the programme temperature is based on the temperature stated on the care label in the textiles.
en Positioning and connecting H Elbow for securing the water drain hose* 5 Positioning and P Water supply hose on standard/AquaSecure models connecting gninoi t iP so dna gni tcenoc *depending on the model Included with the appliance Note: Check the machine for transport damage. Never use a damaged machine. If you have a complaint, please contact the retailer from whom you purchased the appliance, or our after-sales service.
Positioning and connecting under high water pressure. To prevent leaks and water damage, you must follow the instructions in this section. Notes ■ In addition to the safety information listed here, the local water and electricity supplier may have special requirements. ■ If in doubt, have the appliance connected by a specialist. Installation surface Note: The washing machine be stable so that it does not move around. ■ The installation surface must be firm and level.
Positioning and connecting 2. Unscrew and remove all four transport brace screws. Remove the sleeves. To do this, remove the mains cable from the holders. a FP a FP 3. Fit the covers. Lock the covers firmly in place by applying pressure to the snap-in hooks. a FP PD[ FP en Tip: The following are available from specialist dealers/the after-sales service: ■ An extension for Aqua-Stop or cold water supply hose (approx. 2.50 m); order no.
Positioning and connecting ■ Only tighten the screw connections by hand. If the screw connections are tightened too much with a tool (pliers), the thread may be damaged. Optimum water pressure in the supply network At least 100 kPa (1 bar) Maximum 1000 kPa (10 bar) When the tap is open, the water flow is at least 8 l/min. If the water pressure is higher than this, a pressure-reducing valve must be installed. Connection Connect the water supply hose to the water tap (¾" = 26.
en Positioning and connecting In doing so, hold the foot tight and do not adjust its height. The lock nuts on all four appliance feet must be screwed tightly against the housing. ■ Drainage into a siphon The connection point must be secured using a hose clamp with a diameter of 24-40 mm (available from specialist dealers).
Positioning and connecting ■ ■ ■ ■ ■ The mains cable is only replaced by a qualified electrician (if this is necessary). Replacement mains cables are available from the aftersales service. No multiple plugs/couplings or extension cables are used. If an earth-leakage circuit breaker is used, only a type which displays this symbol is used: z. Only this symbol guarantees compliance with the currently applicable regulations. The mains plug can be accessed at all times.
en Positioning and connecting Transportation e.g. when moving home Preparatory work: 1. Turn off the water tap. 2. Reduce the water pressure in the supply hose. Maintenance – filter in the water supply ~ Page 24 3. Drain the remaining detergent solution. Maintenance – detergent solution pump blocked ~ Page 23 4. Disconnect the washing machine from the mains. 5. Remove the hoses. Installing the transport locks: 1. Remove the covers and keep them in a safe place. Use a screwdriver if necessary. 38 2.
6
Aqua-Stop warranty Only for appliances with Aqua-Stop In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: 1. If water damage is caused due to a fault in our Aqua-Stop system, we will compensate domestic customers for the damage caused. 2. The liability guarantee is valid for the service life of the appliance. 3.
