Washing machine WM..N... siemens-home.bsh-group.com/welcome en ,QVWUXFWLRQ 0DQXDO DQG ,QVWDOODWLRQ ,QVWUXFWLRQV ens-home.
Your new washing machine Note/tip You have chosen a Siemens washing machine. Information about the optimum use of the appliance/any other useful information. Please take a few minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands required by Siemens, every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition.
en Contents enI structionManual ndInstal tionI structions 8 Intended use. . . . . . . . . . . . . . . . .4 ( Safety instructions . . . . . . . . . . .5 Detergent . . . . . . . . . . . . . . . . . . 23 Correct selection of detergent . . . . . .23 Saving energy and detergent . . . . . .24 Children/people/pets . Installation. . . . . . . . . . Operation . . . . . . . . . . Cleaning/Maintenance Programme default settings. . . 24 Spin speed . . . . . . . . . . . . . . . . . . . .24 Ready in . . . . . . . .
en Intended use Detergent drawer and housing . . . . Drain pump is blocked . . . . . . . . . . Drain hose at the siphon is blocked Filter in the water supply is blocked 32 33 34 34 3 Faults and what to do about 8 Intended use ■ esudntI ■ them . . . . . . . . . . . . . . . . . . . . . 34 Emergency release . . . . . . . . . . . . . 34 Information on the display panel . . . 36 Faults and what to do about them . . 36 4 After-sales service . . . . . . . . . . 38 J Technical data . . . . . . . . . . . .
Safety instructions ( Safety instructions The following safety information and warnings are provided to protect you from injury and to prevent material damage to your surroundings. It is nevertheless important to take the necessary precautions and to proceed with care when installing, maintaining, cleaning and operating the appliance.
en Safety instructions Keep packaging, plastic film and packing components away from children. : Warning Risk of poisoning! Detergents and care products may result in poisoning if consumed. If accidentally swallowed, seek medical advice. Keep detergents and care products out of the reach of children. dangerous situation. Make sure that: ■ ■ : Warning Risk of burns! When washing at high temperatures, the glass in the appliance door becomes hot.
Safety instructions circuiting or fire due to overheating. The mains cable must not be kinked, crushed or altered, and must not come into contact with any heat sources. : Warning Risk of fire/material damage/ damage to the appliance! The use of extension cords or power strips may result in fire due to overheating or short circuiting. Connect the appliance directly to an earthed socket that has been correctly installed. Do not use extension cords, power strips or multi-way couplers.
en Safety instructions Caution! Material damage/damage to the appliance ■ If the water pressure is too high or too low, the appliance may not be able to operate properly, and it may also result in material damage or damage to the appliance. Make sure that the water pressure in the water supply facility is at least 100 kPa (1 bar), and does not exceed 1000 kPa (10 bar).
Safety instructions Do not use cleaning agents that contain solvents. : Warning Risk of injury! If you support your weight/sit on the appliance door when it is open, the appliance may tip over, which may result in injury. Do not support your weight on the appliance door when it is open. Risk of inIfjury! you climb onto the ■ appliance, the worktop may break, which may result in injury. Do not climb onto the appliance.
en Safety instructions Cleaning/Maintenance : Warning Risk of death! The appliance is powered by electricity. There is a risk of electric shock if you come into contact with live components. Therefore please note: ■ ■ ■ ■ ■ ■ Switch off the appliance. Disconnect the appliance from the power supply (pull out the plug). Never take hold of the mains plug with wet hands.
Environmental protection ■ ■ Clean the appliance with nothing but water and a soft, damp cloth. Remove any detergent, spray or other residues immediately. ■ ■ 7 Environmental protection ■ Packaging/used appliance noitceorplamnoteriEv ) Dispose of packaging in an environmentally-responsible manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (Waste Electrical and Electronic Equipment - WEEE).
en ■ Positioning and connecting Standard ■ Aqua-Secure # ■ ( Mains cable 0 Water drain hose with elbow 8 Water supply hose on AquaSecure model @ Water supply hose on Aqua-Stop model H Bag: ■ Operating and installation instructions + supplementary sheet for the operating and installation instructions ■ After-sales service location directory* ■ Warranty* ■ Cover caps for openings after the transport locks have been removed ■ Measuring aid* for liquid detergent ■ Adapter with sealing washer from 21
Positioning and connecting ■ ■ If the washing machine is lifted by its protruding parts (e.g. the washing machine door), the components may break off and cause injuries. Do not lift the washing machine by protruding parts. If the hose and mains cables are not routed properly, there is a risk of tripping and injury. Route hoses and cables in such a way that there is no risk of tripping. Caution! Damage to the appliance Frozen hoses may rip/burst.
en Positioning and connecting Removing the transport locks Caution! Damage to the appliance ■ The machine is secured for transportation using transport locks. If the transport locks are not removed, the machine may become damaged when it is operated. Before using the appliance for the first time, make sure that you completely remove all four transport locks. Keep the locks in a safe place.
Positioning and connecting Tip: The following are available from specialist retailers/our after-sales service: ■ Extension for Aqua-Stop and cold water supply hose (approx. 2.50 m); order no. WMZ 2380, WZ 10130, Z 7070X0 ■ A longer supply hose (approx. 2.20 m) for standard models; individual component number for the aftersales service: 00353925 Water inlet : Warning Risk of electric shock! The Aqua-Stop contains an electric valve.
en ■ Positioning and connecting Model: Aqua-Stop Caution! Damage to the appliance/fabrics If the end of the drain hose is immersed in the drained water, water may be sucked back into the appliance and may damage the appliance/fabrics. Make sure that: – The plug does not prevent drainage from the sink. – The end of the drain hose is not immersed in the drained water. – The water drains away quickly enough. Note: Open the water tap carefully, checking the leak tightness of the connection points.
Positioning and connecting All four appliance feet must stand firmly on the ground. 3. Tighten the lock nut against the housing. In doing so, hold the foot tight and do not adjust its height. The lock nuts on all four appliance feet must be screwed tightly against the housing. ■ ■ ■ ■ ■ Electrical connection : Warning Risk of death! There is a risk of electric shock if you touch live components. ■ Never touch or hold the mains plug with wet hands.
en Positioning and connecting Note: To prevent foaming, only use half the amount of detergent recommended by the detergent manufacturer. Do not use detergents designed for wool or delicates. 10. Close the detergent drawer. 11. Press the I button. 12. When the programme ends, switch off the appliance. Your washing machine is now ready to use. Transportation e.g. when moving home Preparatory work: 1. Turn off the water tap. 2. Reduce the water pressure in the supply hose.
Getting to know the appliance en * Getting to know the appliance Washing machine ecnailpehtwonk gnitGe # ( 0 8 @ Detergent drawer Operating/display panel Loading door with door handle Service flap 19
en Getting to know the appliance Control panel Control panel differs depending on the model ( Programmes ~ Supplementary sheet for the operating and installation instructions. 0 Programme selector 8 Display panel for settings and information Display panel Note: The tables show possible setting options and information in the display panel; these differ depending on the model.
Laundry Button Display indicator Description Display indicator Description 8 Additional programme settings: ~ Page 25 w Childproof lock @ (¦ speed eco I Button for starting a programme, interrupting a programme, e.g.
en Laundry Therefore, note the following tips when preparing your laundry: ■ Empty any pockets. ■ ■ Check for metal items (paper clips, etc.) and remove them. Wash delicates in a laundry bag (tights, underwired bras, etc.). ■ – Light: Do not prewash; select the speed setting if necessary – Normal – Heavy: Load less laundry; select a programme with prewash – Stains: Remove/pretreat stains while they are fresh. Firstly, dab with soapy water; do not rub.
Detergent Dyeing/bleaching Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye manufacturer's instructions. Do not use the washing machine to bleach clothes. ■ ■ Soaking 1. Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions. 2. Select the desired programme. 3. Press the I button to start the programme. 4. After approx. ten minutes, press the I button to pause the programme. 5.
en Programme default settings Saving energy and detergent For light and normal soiling, you can save energy (lower washing temperature) and detergent. 0 Programme default settings The programme default settings for all programmes are preset at the factory and are displayed in the display panel after the programme is selected. You can change the default settings by repeatedly pressing the corresponding buttons until the required settings are displayed in the display panel.
Additional programme settings Note: The maximum speed that can be set depends on the model and programme that has been selected. ■ ■ ■ Ready in (û, û Finished in, Finish in, Ready in) Before starting the programme, you can preselect the programme end ("Ready in" time) in hourly increments (h = hour) up to a maximum of 24 hours. To do this: 1. Select a programme. The programme duration is displayed for the selected programme, e.g. ƒ:„‹ (hours:minutes). 2.
en Operating the appliance is consistent with the selected programme, without the eco setting. If you press the speed eco button once, you select the speed setting. If you press the button again, the eco setting is activated. The respective symbol is shown in the display when the setting is activated. If you press the button again, no setting is activated. 1 Operating the appliance Preparing the washing machine ecnailpehtgniaOrep Notes ■ The washing machine must be correctly installed and connected.
Operating the appliance en The settings are not saved when the appliance is switched off. ~ "Additional programme settings" on page 25 Overview of programmes ~ Supplementary sheet for the operating and installation instructions. ~ "Programme default settings" on page 24 ~ "Additional programme settings" on page 25 Placing laundry into the drum Caution! Damage to the appliance Cleaning agents and agents for pretreating laundry (e.g. stain removers, prewash sprays, etc.
en Operating the appliance prevents blockages in the washing machine's piping. Pour the detergent and care products into the appropriate compartments: Note: Do not use the measuring aid for gel detergents and washing powder, or for programmes with prewash or when the “Ready in” time is selected. For models without a measuring aid, pour the liquid detergent into the appropriate dispenser and place it in the drum.
Operating the appliance To activate/deactivate, press and hold the Spin speed and Ready in buttons at the same time for approx. three seconds. The w symbol appears in the display panel. ■ w lights up: The childproof lock is active. ■ w flashes: The childproof lock is active and the programme selector has been adjusted. If you reset the programme selector to the initial programme, the symbol lights up again.
en Sensors Programme end ■ “Ÿš appears in the display panel and the indicator lamp of the I button goes out. Leave the door and detergent drawer open so that any residual water can evaporate. Removing laundry/switching off the appliance 1. Turn the programme selector to the off position. The appliance is switched off. 2. Open the door and remove the laundry. 3. Turn off the tap. Note: Not required for Aqua-Stop models.
Appliance settings Q Appliance settings You can change the following settings: ■ The volume of the information signals (e.g. at the end of the programme) and/or ■ The volume of the button signals. sgnitescnailAp In order to change these settings, you will need to activate the setting mode. 1/2/3/4... positions on the programme selector Activating the setting mode 1. Turn the programme selector to position 1. The washing machine is switched on. 2.
en Cleaning and maintenance Machine housing/control panel ■ ■ ■ Wipe the housing and the control panel with a soft, damp cloth. Remove the detergent residue immediately. Do not clean with a water jet. b) If the measuring aid* for liquid detergent is used, pull it upwards. Drum Use chlorine-free cleaning agents, do not use steel wool. If there are odours in the washing machine, or to clean the drum, run the Cottons 90 °C programme without laundry. Add washing powder.
Cleaning and maintenance b) If the measuring aid* for liquid detergent is used, slide it forwards, fold down and click into place. en 4. Take the drain hose out of the retainer. Remove the sealing cap and allow the water to flow out into a suitable container. Replace the sealing cap and place the drain hose in the retainer. 5. Push in the detergent drawer. Note: Leave the detergent drawer open so that any residual water can evaporate. 5. Carefully unscrew the pump cover; residual water may leak out.
en Faults and what to do about them Drain hose at the siphon is blocked 1. Switch off the appliance. Disconnect the mains plug. 2. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out. 3. Clean the drain hose and siphon connecting piece. 6. For standard and Aqua-Secure models, clean the filter on the rear of the appliance: Remove the hose from the rear of the appliance. Use pliers to remove the filter and then clean it. 4.
Faults and what to do about them en : Warning Risk of injury! You may injure your hands if you reach into the drum while it is turning. Do not reach into the drum when it is turning. Wait until the drum has stopped turning. Caution! Water damage Any escaping water may cause water damage. Do not open the washing machine door if water can be seen through the glass. If the laundry has to be removed, the washing machine door can be opened as follows: 1. Switch off the appliance. Disconnect the mains plug. 2.
Faults and what to do about them en Information on the display panel Display Cause/remedy Œ lights up ■ ■ Œ flashes ■ ■ ■ | lights up ■ ■ ■ “: ‚‰ ■ ■ The temperature is too high. Wait until the temperature drops. The water level is too high. It is not possible to add laundry. Close the door immediately, if necessary. Press the I button to continue the programme. Laundry may be caught. Open and close the door again and press the I button.
Faults and what to do about them Faults The door cannot be opened. Cause/Remedy ■ ■ ■ ■ The programme will not start. ■ ■ ■ ■ The drum briefly jerks or judders after the programme has started. The water is not draining. ■ ■ The spin result is not satisfactory. Laundry is wet/too damp. The spin cycle runs several times. The programme is taking longer than usual. Residual water in the care-product compartment i.
en After-sales service Faults Cause/Remedy Loud noises, vibrations and machine "movement" during the spin and/or drain cycles. The noise level during pumping is different from the one during washing. ■ ■ ■ The display panel/indicator lights do not work while the appliance is running. There is detergent residue on the laundry. ■ ■ ■ ■ ■ The Œ symbol lights up in the display in pause mode. ■ ■ In the pause mode, the Œ symbol in the display goes out. Is the appliance aligned? Align the appliance.
Technical data J Technical data Dimensions: 850 x 600 x 550 mm (Height x width x depth) Weight 63-83 kg (depending on model) Mains connection: Mains voltage 220-240 V, 50 Hz Nominal current 10 A Nominal output 2300 W Water pressure: 100-1000 kPa (1-10 bar) Power consumption when switched off: 0.12 W Power consumption when ready for use (left-on mode): 0.50 W atdlcinhTe en Our warranty does not cover defective feed lines or fittings leading to the Aqua-Stop connection at the tap. 4.
Repair order and advice in the event of faults GB 0344 892 8999 (Calls charged at local or mobile rate.) IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com 0DQXIDFWXUHG E\ %6+ +DXVJHUlWH *PE+ XQGHU 7UDGHPDUN /LFHQVH RI 6LHPHQV $* *9001255969* 9001255969 (9702)
