User Manual

2/4
Siemens Building Technologies CE1N2148en
Landis & Staefa Division 26.01.2000
Type summary
R dia. Type reference Description
½” VYC515 Single-pipe valve for floor connection
½” VYC525 Single-pipe valve for wall connection
½” VUC515 Reversed angle valve
15 AVC515-60 Connecting pipe, copper, nickel-plated, 60 cm long,
15 mm dia.
15 AVC515-80 Connecting pipe, copper, nickel-plated, 80 cm long,
15 mm dia.
15 AVC515-90 Connecting pipe, copper, nickel-plated, 90 cm long,
15 mm dia.
15 AVC515-110 Connecting pipe, copper, nickel-plated, 110 cm long,
15 mm dia.
15 AV15-CC15 Compression fitting, integrated in the valves
12 AV15-CC12 Compression fitting for copper pipe, 12 mm dia., box with
50 pieces
14 AV15-CC14 Compression fitting for copper pipe, 14 mm dia, box with
50 pieces
15 AV15-CC15 Compression fitting for copper pipe, 15 mm dia, box with
50 pieces
16 AV15-CC16 Compression fitting for copper pipe, 16 mm dia., box with
50 pieces
12 AVC15-CP12 Compression fitting for plastic pipe, 12 mm dia., box with
50 pieces
16 AVC15-CP16 Compression fitting for plastic pipe, 16 mm dia., box with
50 pieces
Equipment combinations
Suitable for use with the thermostatic valve heads RT56.05, RT56.15, RT76.052 and
RT86.2.
Refer to data sheets N2143, N2144 and N2156.
Technical design
•
The pre-adjusted gland can also be replaced when the system is under pressure
•
Using the AV225 mounting tool, the whole valve insert can be checked and / or re-
placed without draining the system
•
Determination of the length of nickel-plated connecting pipe of 15 mm dia.: effective
pipe length = distance of radiator threads minus 44 mm
Mechanical design
These valves allow the flow rate to be pre-adjusted by limiting the stroke (kv-value). A
pre-adjusting screw with the reference numbers 1 to 7 is located under the protective
cover.
The special design and material of the valve plug allow perfect flow control and tight
shutoff.