User Manual

Cleaning and servicing en
25
Setting the floor tool
▶
Use the switch to set the floor
nozzle to the required base.
→Fig.
12
Overview of the floor nozzle
settings
Here, you can find an overview of the
floor nozzle settings.
Symbol Use
Vacuum rugs and carpets.
Vaccum parquet and hard floors.
Vacuuming with accessory
1. Place the required nozzle onto the
telescopic tube or the handle.
2. After use, take the nozzle that is
used from the telescopic tube or
remove from the handle.
Stopping and parking the ap-
pliance
1. Switch off the appliance.
2. If you want to stop vacuuming for
longer use periods, use the stor-
age aid on the underside of the
appliance.
→Fig.
10
3. Use the parking aid for shorter
programme pauses.
→Fig.
13
Dismantling the appliance
1. Disconnect the connection
between the telescopic tube and
the handle.
→Fig.
14
2. Push the two locking catches to-
gether.
3. Pull the tube out of the appliance.
→Fig.
15
Cleaning and servicing
Cleaning and servicing
Motor protection
Pay attention to dirt in the motor.
ATTENTION!
Dirt in the motor may damage the
motor.
▶
Never operate the appliance
without a dust bag.
Cleaning the motor protection
filter
Tip:To achieve the best possible va-
cuuming results, tap out or wash the
motor protection filter at regular inter-
vals. After vacuuming fine dust
particles, clean or replace the motor
protection filter in order to guarantee
the appliance's suction.
1. Switch off the appliance.
2. Unplug the mains plug.
3. Open the lid.
→Fig.
16
4. In order to release the motor pro-
tection filter from the catch mech-
anism, pull on the side tabs.
→Fig.
17
5. Remove the motor protection filter
in the direction of the arrow.
6. Tap out the motor protection filter.
7. If the motor protection filter is very
dirty, rinse it.
→Fig.
18
8. The filter must then be left to dry
for at least 24hours.
9. Care for the appliance and the ac-
cessory parts with a standard com-
mercially available plastic cleaner.
10.If required, vacuum the dust com-
partment using a second appli-
ance or clean it with a dry duster
or dusting brush.