User Manual

Unrestricted © Siemens AG 2018
IOP-2 V2.1
Diverse Usability improvements
Feature /
function
Benefits
Black/ Yellow Safety bar within the status
screen.

The bar says, that a safety functionality of
a safety drive has been commissioned
and enabled.
The status screen will be displayed
automatically when changing from
manual mode to automatic mode.

The display will adapt automatically to the
operating status (Hand/ Auto) of the drive.
In connection with the CU230P-2, the
setpoint of the motor speed will be
displayed in Hertz (Hz).

The setpoint screen by default displays
the motor speed as a percentage of the
total possible speed of the motor.
This behavior changes for the SINAMICS
CU230P-2 where the default setpoint
value is displayed in Hertz (Hz). Thereby
a
consistent display of the motor speed in
Hertz (Hz) will be supported.
Downloaded and Uploaded parameters
sets are now stored directly into the
"CPS" folder on the IOP-2.

Standard and custom specific parameter
sets will be displayed consistent in the
screen “Download: panel to drive”.
Page 44