Manualshelf

User Manual

ManualsBrandsSiemens ManualsBC - Display and Operation UnitsEnvironmental Product Declaration
12
EPD - Type II
Based on ISO 14021
Building Parts
5WG1580-2EB09 Digital indoor control unit silver
5WG1580-2EB71 Digital indoor control unit aurous
5WG1580-8GB01 Embedded indoor control unit bottom box
5WG1581-2EB01 Digital indoor control unit 7 inches silver
5WG1581-2EB71 Digital indoor control unit 7 inches aurous
Typical energy consumption variant *) see below
Fire load variant *) see below
5-PP Polypropylene plastic bag variant
4-LDPE Low density polyethylene EPE bottom variant
4-LDPE Low density polyethylene EPE cover variant
20-PAP Corrugated fibreboard Folded box variant
Total weight of device variant *) see below
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
Steel; powder-coated Cross groove screw M3×5 variant
Steel; lacquered Bottom base (embedded bottom box) variant
Al alloy; zinc plated Cover plate variant
Al alloy; lacquered Bottom cover (back shell) variant
Al alloy; lacquered Small cover plate (bottom cover) variant
LCD > 100 cm² variant
FR4; TBBA; solder SnAgCu MB-PCBA variant
FR4; TBBA; solder SnAgCu SUB-PCBA
*Variant parts list
[g]
Total weight of device
Cross groove screw M3×5
Bottom base (embedded bottom box)
Cover plate
Bottom cover (back shell)
Small cover plate (bottom cover)
LCD > 100 cm²
MB-PCBA
5WG1580-2EB71
957
5WG1581-2EB01
767
1
5WG1580-2EB09
957
1
370
88
81
350
88
81
1
370
67
350
67
426
5WG1580-8GB01
426
72
340
85
64
205 205
5WG1581-2EB71
767
64
1
340
85
72
Materials
Packaging
Others
PCBAs (Printed Circuit Board
assembled)
Environmental
Product Declaration
Type of equipment /
Product No.
Product
Environmentally compatible
product design
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes the
environmental impact of its products with respect to production, procurement, sales, use, services and disposal during the
product and process planning phases by complying with Siemens EP Standard (former SN 36350) "Specifications on
Environmentally Compatible Product and System Design".
Metals
Product use
Restricted Page 1/2

Summary of content (2 pages)